Fog lights, which are installed to ensure that the driver can see the road even through dense fog and climate conditions, usually come in limited color options. The most popular ones being white. In some of the best fog lights available, one would either use the blue fog light tint or yellow fog light tint. If you are confused as to which is better, you should read more.
Fog light tint popular colors
1. Yellow Fog Light Tint
The drivers might prefer yellow for the lights as it pierces through the fog easily and even in rain and darkness. A lot of people prefer replacing white lights with yellow bulbs or try to use super bright and powerful white lights. However, yellow is considered the best for fog and rain to aid the driver invisibility.
The main cons of this colored tint are that once you switch the lights off, the yellow flashes remain for a while and it is not ideal for daylighting as it is really warm for a sunny day.
2. Blue Fog Light Tint
The Blue tint will give a bright color and are very popular in European regions. Blue Lights are considered useful as it cuts through fog, rain and bad road conditions. They are better than halogen lights and are considered highly energy-efficient and consume low power.
However, they take time to power up. Blue lights will take a little time to reach their maximum brightness. At times, blue lights, if powerful can be blinding and takes a while to do away with the flashes which may affect the driver while driving.
You should always choose the tint for your lights depending on how and where you want to use them. It is always simple to tint your existing fog lights if it’s one of the best fog lights available with a yellow or blue vinyl film which is easily available in your nearest hardware store or even online. It is a super cheap alternative and provides you with the option to change it as per your liking. It can be easily peeled off. In addition to this, the vinyl film will also protect your lights and are resistant from corrosion.
This helps you to change your fog light color in case you decide otherwise. Tints are easy to install and since they are not that expensive, they can be replaced in case you are not happy with the finish.
Install a tiny film in 6 easy steps by yourself
Step 1: Purchase the right colored film
Evaluate your weather conditions and your usage of the vehicle. Ask your friends if they have used a tint before to see what color is the best. Also, keep in mind the traffic laws. A lot of traffic regulation certain colors as it can be blinding.
Step 2: Gather your tools
You will require a cut-kit, which is simply a collection of different sizes of blades to help achieve the perfect finish. You will need a clean cloth and cleaners to clean your lights, a dry cloth, a water spray, and a hairdryer.
Step 3: Clean your headlights
It is very important that you clean your headlights well. If there is any dust left, you will end up getting it stuck on your headlights. Clean it using a cleaner liquid and ensure it is clean and that there is no dust particles left behind.
Step 4: Position your film
Remove the back of the tint film and uncover the adhesive part of the film. Now place t carefully on the flat side of the headlight so that you get a good start on the film.
Step 5: Apply the film uniformly.
You can spray water on the top of the film so you can easily glide it through the entire headlights. Once you position your film, try to swiftly but steadily cover your entire headlights.
In order to cover the curved areas of the lights, use a hairdryer to heat the tint so t can easily get curved out as per your need. Make sure that you do not use too much heat as it might just damage the vinyl film.
Step 6: Trim the excess Vinyl Film
After you are done applying the film, ensure that you trim the excess parts carefully using adequate sized blades with clarity so that it looks neat. Seek help if needed.
Check if there are any bubbles and then try to use heat on them with a hairdryer such that the bubbles go away. You can also choose to pop the bubbles with a needle if required.
Now that you know more about the different colors of tint and how to install them, you can decide which color is most suitable. Also, choose a good quality tint for the best fog lights that you purchase and always buy extra tint because you might not get the perfect finish in the first attempt.
Read More :