Car Wont Start After Getting Gas – How To Fix This Problem?

by

11 February 2023

Automotive

car wont start after getting gas

Imagine you are in the middle of a long highway, and your car stops working suddenly. There are no towns in sight for hundreds of miles, so there are no pumps and garages either. However, you still have gas in your tank. Do you know why your car wont start after getting gas?

If you wish to prevent such a dreary situation, you must learn the answers to this aforementioned question. Here, I have listed several reasons why this might happen and what you must do to avoid them.

Why Car Wont Start After Getting Gas?

The primary reasons why your car won’t start after getting gas on the engine can vary from person to person. However, for most vehicle owners, these are the most commonly associated reasons:

1. The Battery Is Dead Or Corroded

If you don’t see your car running even after you hit the gas, then the car battery is the most common problem that most people face. There is a high chance that your car battery has got depleted over time or its battery terminals have corroded.

As a car driver, you should know that all car batteries have a life of three to five years. There are various ways why your car battery might deplete fast. This includes leaving the headlights on when not driving.

To test this, try charging the battery somehow and testing the alternator together at 12v.

2. The Alternator Is Damaged

In the previous point, I explained how the battery could be the source of all your troubles. In the end, I explained charging the battery and alternator at 12v.

If you see your battery start functioning properly but still won’t start your car, then you know whom to blame.

For the uninitiated, the alternator is the machine that charges up the battery as the car is running. If it’s damaged, your battery will never be fully charged and will discharge pretty quickly.

Therefore, always keep a multimeter in hand to check the status of your alternator. Use it to test the alternator in two ways. If the readings are lower than these readings, then change your alternator:

  • When the engine is off: If the multimeter reading is less than 12v, it’s faulty.
  • When the engine is on: If the multimeter reading does not increase more than 12v, it’s faulty.

3. The Fuel Filter Is Clogged

The fuel filter is a car part that is responsible for filtering out contaminants in the fuel reaching the engine. This mainly includes solid particulates like dirt and other debris.

However, since the fuel filter traps all the dirt, it can get clogged with particulates over time. You can understand this by gauging the efficacy of your car. If its mileage and performance decrease suddenly over time, then your filter is clogged.

Therefore, a good practice is to clear out and clean your fuel filter every 25,000 miles.

4. The Fuel Pump Is Defective

The fuel pump is one of the most important machines that help turn your car. The fuel pump helps in pumping your engine full of fuel from your fuel tank. Therefore, if your car is not starting, it could be that the engine is not getting any fuel due to a damaged fuel pump.

Your car’s fuel pump can get damaged over time due to the heat of the car engine, which is always situated close to it. If you think your fuel pump is at fault here, then you can start by checking its pressure using a fuel gauge.

This is another pretty common reason as to why your car wont start after getting gas.

5. There Are Defects In The Starter Motor/Circuit

The starter motor or circuit is responsible for turning or revving your engine. Therefore, whenever you press the ignition button, the starter turns your engine, which in turn makes your car accelerate. 

Therefore, if your car is not starting even though it has gas, your starter motor can be at fault here. This can happen because it may have a solenoid. On the other hand, it can be because of a faulty ignition switch as well.

If this is the case, then you need to get a mechanic to repair it. Repairing the starter motor can cost up to $360.

6. There Is Not Enough Spark

If you have a petrol engine, then your car will definitely have spark plugs inside. These plugs are responsible for igniting the oil in the engine, which then helps it run.

If you notice your engine misfiring a lot when starting up, then your spark plugs are to blame. Getting them changed based on the recommendations of the car manual.

How To Fix This Issue?

How To Fix This Issue?

If your car struggles to start after putting gas in, then there is an issue with the parts explained above. Therefore, to fix this issue and get your car and yourself back on track, there is a pretty simple fix. This is what you need to do, in a step-by-step fashion, as described below:

1. First, try starting the car engine and again until it starts working.

2. Next, you can try opening the car hood and checking all the wires attached to the car battery. If you see any of the fires disconnected, try connecting them (only if you know how to).

Apart from doing these two actions, there is nothing much that you can do. If you see your car remain still after performing these two actions, then you need to contact the nearest garage or mechanic around you.

If you are stranded in the middle of a road or on a highway, then you should keep the numbers of various garages and mechanics handy. A call to a mechanic or garage will solve your problem quickly if you can’t tow it to the closest one.

Frequently Asked Questions (FAQs):

People ask lots of questions regarding why their car wont start after getting gas. Here are my answers to their questions:

Q1. Why Does My Car Sputtering After Getting Gas?

Ans: There can be two reasons why your car sputters after getting gas on it. The two reasons are:

Your EVAP control valve is damaged.
You are using the incorrect fuel for your engine or a low-quality one.

Q2. Can Bad Gas Make My Car Not Start?

Ans: Bad gas refers to the residual fuel in your engine that has not burnt completely. Over time, this gas can get stuck to the motor and the fuel pump. If this happens, then your car will not function properly.

Conclusion

There are many reasons why your car wont start after getting gas. These reasons include damaged batteries, starters, fuel pumps, spark plugs, and fuel filters. The only solution to this problem is to have any broken parts fixed. Therefore, to keep it working at its best, have your automobile checked out and serviced on a regular basis.

Read Also:

Debamalya is a professional content writer from Kolkata, India. Constantly improving himself in this industry for more than three years, he has amassed immense knowledge regarding his niches of writing tech and gaming articles. He loves spending time with his cats, along with playing every new PC action game as soon as possible.

View all posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Related

Motorist Coverage

What Is Uninsured Motorist Coverage?

You may have wondered what your Uninsured Motorist Coverage actually entailed on your car insurance policy as a Tennessee driver. You may not have known, but insurance companies estimate that almost 15% of drivers are operating without insurance. If you are struck by an uninsured motorist, there is no way for you to recover money for damages, injuries, or pain and suffering that resulted from the accident. Therefore, many insurance companies — and a growing list of states — make Uninsured Motorist Coverage mandatory in their policies. This way, you are protected in the event that you are in an accident with an uninsured driver. What does my Uninsured Motorist Policy Cover? The specifics of your uninsured motorist policy will vary from company to company, but in the most general terms, you and your passengers are covered for bodily injury, property damage, lost wages, or pain and suffering. Additionally, the policy-holder will be covered in the event of a hit-and-run, where it is impossible to determine who the driver was, let alone if they were insured or not. Note that your uninsured motorist policy is not the same as an UNDERINSURED motorist policy, which will cover the difference between your injuries and the maximum of the other person’s policy. Bodily Injury Coverage If you or your passengers suffer personal injuries in an accident with an uninsured motorist, your policy will cover medical bills, lost wages, as well as pain and suffering. Without this policy, being struck by an uninsured motorist would shoulder each individual with the burden of a lack of coverage that was out of their control. Bodily and emotional suffering are often hard to quantify in a car accident, and therefore makes a personal injury lawyer indispensable to claim what is rightfully owed. If you or your passengers have suffered bodily or emotional injury as the result of a wreck with an uninsured motorist, it is suggested you consult with a personal injury lawyer in Knoxville, TN. Property Damage Coverage Property damage is easier to quantify than personal injury because it will reflect the values of repairs or replacements. Even though this is the case, there are still many nuances that you must navigate to ensure you get the proper reimbursement for your situation. Consulting with an attorney is the best way to ensure that your situation is fully rectified with your insurance company and that you or your passengers will feel fairly compensated for your accident with an uninsured driver. It was not your fault that the other driver was uninsured, and it should not be your financial burden. Am I required to have Uninsured Motorist Coverage in Tennessee? Yes, you are required to have an uninsured motorist clause on your insurance policy in Tennessee. Hopefully, you will never be required to use this coverage, but in the event that you must, you can rest easy knowing that you are properly covered even though the other driver was fully uninsured. A growing number of states legally require each insured driver to have this additional coverage, and Tennessee is one of these states. Read Also :  Along For The Ride: Passenger Rights In-Vehicle Accidents There Is A Pothole Problem In America – How To Protect Your Car From Damage? Feature image source: theandrewagency.com

READ MOREDetails
Shipping Your Car

4 Common Mistakes To Avoid When Shipping Your Car

Shipping a car can feel like an overwhelming process, especially if you have never had to use this kind of service before. Shipping your car can be a great way to move your car to your new home a few states away, or you might want to have a car that you have purchased brought to you so that you do not have to drive it from the dealership to your home. Shipping doesn’t have to be hard if you know more about the kinds of mistakes that often cause issues for those shipping cars. When you know what not to do when looking at shipping your car, you can easily have a good experience with the shipping process. Having someone else bring your car to you can be a big help when you are moving or when you do not want to have to take the time to go get the new car that you have purchased. If you are ready to learn more about the common mistakes that people make when shipping their cars, you need to read on! Common Mistakes To Avoid When Shipping Your Car 1. Prepare Your Car When the shipping company shows up to load your car onto the trailer, it needs to be ready to be picked up. It is a good idea to have cleaned your car and to have removed anything that is in the backseat or the trunk that could roll around and cause damage to the car or itself. You will also want to be sure that you have all the documentation that you need to prepare on your end ready for the shipping company. You might need to provide a valid photo ID for the pickup to be completed and the company will likely ask to see proof that you have the title to the car or the registration for the car. Make sure that you are ready to allow them to inspect the car as well since they need to note the condition of the vehicle on the bill of lading that will be given to you when the car is delivered. 2. Do Your Research Many people just pick the lowest quote that is offered to them by a shipping company or they pick the first shipping company that comes up in a search. This can work out all right in the end but you will serve yourself better by taking the time to look at your options more closely. It is possible to get involved in shipping scams when you go for the cheapest quote and you should also make sure that you are aware of the various shipping options and processes that the company might be offering. Looking into online reviews and asking for quotes from a few different companies are good ways to be sure that you are working with the right shipping company for your needs. You should also make sure to ask to see insurance documentation and proof of registry with your state for interstate travel from any company that you are thinking of working with. Taking this step will protect you from scams and help you be sure that the company you are working with is the right one for the job. 3. Not Getting the Bill of Lading When your car is dropped off at your new address or a shipping terminal location, you will need to ask for the bill of lading to be given to you. You should be required to sign this document stating that the car was delivered in good condition and that it arrived when it was expected. The bill of lading is your proof that the car was delivered and you can choose not to sign it if you believe that the car was damaged during the trip or if it was not delivered as expected. When you sign the bill of lading, you are approving the delivery and you will not be able to go back and argue that you were not given the service that you paid for. Having the bill of lading in your hand, signed or not, is key to being able to take action if you have experienced issues with the shipping job that was done on your behalf. 4. Leaving Personal Items in Your Car When you leave things that could be stolen or damaged in your car during the shipping process, the company is not liable or responsible for their loss, damage, or theft. You will want to be sure that you remove anything that could go missing or be damaged from your car before it is put on the car trailer. This can be cameras, dash décor, and more. Make sure that you sweep your car at least once for things that you do not want to be visible in the car during the trip or loose and rolling around. This is a key area where many people make mistakes and there will not be any recourse open to you for the replacement of these items under the shipping contract you have signed. Shipping a Car Can be Easy! If you have been worried that you will not be able to find the right shipping company for your needs or that you will have a bad experience with the company that you hire, you just need to use these tips and tricks to prevent issues. You will find that doing your research and making sure that your car is ready for pickup can make a big difference in the kind of experience that you have with a shipping company. While it can be nerve-wracking to hand your car over to someone that you do not know to be driven across the country, you will be so glad that you did not put that many miles on your vehicle just to relocate it and that you did not have to drive for that many hours yourself. There are many reasons that car shipping is a great option and you should not be intimidated by the newness of the experience when it is a good choice for your needs. Read Also: 5 Proven Tips To Keep Your Car in Perfect Condition 10 Causes Of Uber Accidents In The United States 7 Things to Do After a Car Accident in Fort Worth For Your Protection and Safety

READ MOREDetails
Excavator

What Industries Use Excavators?

If you’re interested in knowing more about the uses of the excavator, you can read more here in this article. Excavators are very useful machines in many industries such as construction or mining. This is because of its ability to dig and lift a large volume of materials. How do excavators work? What are they used for? The answers to those questions will be found if you read more here below. What is an excavator? An excavator is a piece of heavy equipment that is often utilized in many industries. As the name suggests, it is able to excavate and lift materials. It consists of a bucket that is attached to the undercarriage by the boom. The undercarriage has tracks or wheels to move through difficult terrains. Most excavators have diesel engines that power the machine through hydraulic pressure. Industries that use excavators: Excavators have many applications across many industries. Below are several examples. Construction In the construction industry, excavators have many uses. Firstly, they are used to demolish old structures and remove debris. They are also used in normal grading work and landscaping before a new structure is erected. Excavators are used to removing heavy materials such as debris, soil, and construction materials. After the landscape is prepared for construction, excavators are again used to dig foundations and holes. They are also used to install heavy piles in foundations. In heavy-duty construction jobs, the type of excavators that are used are Mining Excavators are also very crucial in the mining industry. Without excavators, it is impossible to dig through the soil to find valuable resources. The mining industry often operates in areas with uneven terrain. Excavators are used to landscaping these terrains and move heavy debris and soil. Forestry Forestry is another industry that makes heavy use of excavators. Excavators are used to removing and carrying heavy wood and logs. They are also used to dredge reservoirs and excavate soil in avalanche-prone areas. Types of excavators: Here are several types of excavators. Different types are used for different industries and functions. 1. Crawlers Crawlers or compact excavators have two tracks rather than wheels. They are often used in construction and mining jobs to lift soil and other materials. The chain tracks enable crawlers to move through hilly terrains with more ease. 2. Dragline excavators They have a bucket that is attached to a hoist and a dragline. They are often used for dredging in heavy-duty civil engineering jobs. 3. Skid steer excavators This excavator has a bucket that faces away from the driver, which makes it useful in narrower sites. They are frequently utilized in digging and residential works in limited spaces. 4. Long reach excavators They have longer arms and boom. It makes them suitable for areas with difficult terrains and hard-to-reach sites. 5. Suction excavators Suction (vacuum) excavators are often used for underground applications to reduce the risk of damage. Now you know about the use of excavators in different industries. Hopefully, the information you get after you’ve read more here will be useful to you. Read Also: Which Type Of Forklift Your Industry Need: Have A Look At Them! Construction Safeguards: What Are the Top 3 Leading Risks for machine-related Amputation? Why Many Businesses Owe Their Success to Quality Scales Best Uses for Stainless Steel in Construction

READ MOREDetails