Get to Know Interstate and Intrastate Heavy Haul Transport

Published on: 16 September 2019 Last Updated on: 12 September 2024
Heavy Haul

Heavy haul fleets offer interstate and intrastate transport choices, and both cover different regulations and protocols.

Interstate hauling refers to the trucks that cross state lines in delivering cargo. Intrastate, meanwhile, means the fleet operates locally. Its permit and operational limitations don’t allow it to cross state lines.

They also differ in terms of regulations they have to comply with.

Regulations Covering Interstate Heavy Haul Fleet:

The Federal Motor Carrier Safety Administration is the primary agency that oversees and monitors interstate heavy hauling fleets. Trucking companies need to comply with the Federal Motor Carrier Safety Regulations and the Hazardous Material Regulations.

Of course, each state has its regulations, fees, and permits covering cargo trucks that pass its borders.

Regulations Covering Intrastate Heavy Haul Fleet:

Heavy Haul

For intrastate operations, the state has the primary responsibility to ensure that the fleet is following all rules and regulations governing transport. Typically, the rules and regulations are the same as the Federal Motor Carrier Safety Regulations.

But some states, due to the products they move, have stricter quarantine regulations. They also have different rules on the number of hours a truck driver needs to be on the road, the health qualifications, and age limits.

What is a DOT number?

The Department of Transportation, where the Federal Motor Carrier Safety Administration is attached, assigns different numbers to heavy haul trucks. For instance, there’s a particular number if the truck is transporting hazardous material across state lines. The same goes for the weight of the cargo or if the truck is carrying 9-15 people.

For intrastate trucking operations, the regulations vary. Some states don’t require a DOT number and some do.

The DOT number should not be confused with the DOT certification. If the fleet is DOT certified, it simply means that the truck driver possesses the competence, skills, and knowledge to drive such a big vehicle across the country.

Truckers can’t secure a commercial driver’s license without this DOT certification, and they have to renew their permit every two years. State authorities always check the DOT certification when they flag down delivery trucks and heavy haul fleet.

Fees:

In terms of fees, it stands to reason that when the fleet routinely crosses state lines, it is subject to much higher fees.

To illustrate, their insurance coverage is higher because they are exposed to more risks. The longer the truck driver is on the road, the higher the risks he would be exposed to. Each state also has its fees, surcharges, and levies.

For intrastate cargo, the fees, license plate, and insurance coverage are lower. Again, each state has its own rules covering fees, so for the most part, the trucking company only has to worry about those.

These regulations are necessary considering that the trucks remain the primary mode of transport for cargo across the US. For example, statistics show that trucks carry 80% of the total cargo that’s shipped around the country. The industry is also worth $726 billion every year.

Read Also:

Content Rally wrapped around an online publication where you can publish your own intellectuals. It is a publishing platform designed to make great stories by content creators. This is your era, your place to be online. So come forward share your views, thoughts and ideas via Content Rally.

View all posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Related

Truck Accidents

10 Tips to Prevent Truck Accidents: The Complete Guide for Truck Drivers

We all know that truck accident can cause severe injuries and even death. In fact, according to the National Highway Traffic Safety Administration, there are more than 4,000 people killed in truck accidents each year. The good news is that most of these accidents are preventable. This blog post will discuss some tips that truck drivers can use to prevent accidents from happening. Can Truck Accidents Be Prevented? Regardless of how technology has advanced, there are still many dangers associated with driving a truck. Truck accidents can be caused by several factors, including driver error, mechanical problems, and poor weather conditions. Although accidents cannot always be prevented, there are specific steps that truck drivers can take to minimize the risk of being involved in an accident. Below are some tips on how to avoid truck accidents: Always obey the speed limit and other traffic laws. Be aware of your surroundings, and pay attention to other drivers. Ensure that your truck is maintained correctly and that all mechanical problems are fixed before you hit the road. Avoid driving in poor weather conditions whenever possible. If you must drive in bad weather, use caution and drive slowly. If you are tired, take a break. Driving when you are tired can be just as dangerous as driving drunk. Plan your route, and avoid congested areas whenever possible. Stay alert at all times, and never drink and drive. Following these tips will not guarantee that you will never be involved in an accident, but they can help to reduce the risk. Remember, even if an accident is not your fault, it can still have severe consequences for you and your career. So do everything you can to avoid them. If you or someone you know has been involved in a truck accident, contact a truck accident lawyer as soon as possible. A well-versed Macon Personal Injury Lawyer can help you get the compensation you deserve for your injuries. 1. Give Clear Signs And Signals Regardless of how careful and cautious they are, truck drivers can’t avoid accidents if other motorists on the road don’t know their intentions. Truckers need to give clear signs and signals when changing lanes or making turns. Unfortunately, many car drivers often fail to notice these signals, resulting in serious accidents. 2. Avoid Going To Their Blind Spots Truck drivers should always avoid going to the blind spots of other trucks. If you can’t see the driver in their mirror, then chances are they can’t see you either. 3. Merge Carefully When Entering The Highway It is essential to do so gradually and carefully when merging onto the highway. Speeding up to match traffic flow can be dangerous, as it gives other motorists less time to react. 4. Keep A Safe Distance From Other Vehicles Truck drivers should always maintain a safe distance from other vehicles on the road. This is especially true in bad weather conditions when trucks take longer to stop. 5. Use Extra Caution When Driving Near Schools And Playgrounds Trucks should always use extra caution when driving near schools and playgrounds. Children can be unpredictable and dart out into the street without warning. 6. Use Extra Caution When You Pass When passing other vehicles, use extra caution and give yourself plenty of room. Sudden braking or lane changes can cause accidents. 7. Lower Brights When Approaching Other Vehicles When approaching other vehicles, truck drivers should lower their brights. This will help to avoid blinding the other driver and causing an accident. 8. Avoid Getting Distracted Truck drivers need to avoid getting distracted while driving. This can be difficult, as many things can cause distractions, including cell phones, GPS devices, and other passengers in the cab. If you must use a cell phone or GPS device, pull over to a safe location first. And if you have passengers in the cab, make sure to keep them quiet and out of the way. 9. Stay In The Right Lane Whenever Possible Truck drivers should stay in the right lane whenever possible. This will help to keep traffic moving and reduce the risk of accidents. 10. Be Aware Of Road Conditions Truck drivers should be aware of the road conditions at all times. This includes checking for potholes, icy roads, and other potential hazards. Common Causes Of Truck Accidents As a truck driver, you should be aware of the most common causes of truck accidents. This will help you to be more cautious and avoid these situations altogether. Some of the most common causes of truck accidents include: 1. Driver Error This is the number one cause of truck accidents, and it can be caused by a variety of factors such as fatigue, distractions, and inexperience. 2. Mechanical Problems Trucks are complex machines, and it is not uncommon for them to experience mechanical problems. These problems can often lead to accidents. 3. Poor Weather Conditions Bad weather can make driving a truck very dangerous, and it is one of the leading causes of truck accidents. Final Words If you take the road next to a heavy vehicle like a truck or bus, you need to be extra vigilant. These big boys are not easy to stop, and they will take up most of the road, so there would be hardly any space for you should an emergency happen. Remember that even if these drivers do their best to avoid accidents, there are still factors beyond their control. It would be best if you could avoid being in their blind spot. Do not tailgate and always give them enough space should they need to stop or change lanes. You should also use your horn when necessary to get their attention, especially when it is dark or nasty weather. Lastly, do not cut them off as this will only anger the driver and cause an accident. Read Also: Understanding Truck Accidents in Indiana Have you been in a Semi-Truck Accident? Here Are 4 Reasons You Need to Hire a Lawyer Immediately Legal Ways to Determining Fault for an Arizona Truck Accident 10 Causes Of Uber Accidents In The United States

READ MOREDetails
Dangers of texting and driving for teens

Why Texting Is Not A Good Idea When You Drive

“Nearly 390,000 injuries occur each year From accidents caused by texting while driving.” - National Safety Council, USA (2018 Study) Why Texting and Driving are Dangerous: The rise of social media and the necessity of being connected 24x7 have given rise to many problems. One of the biggest of them all are the dangers associated with driving when you are texting. Youngsters and especially teenagers are the biggest risk takers when it comes to these hazards. The use of WhatsApp, Facebook Messenger, and Instagram Chat all act as sources of distractions. According to a Study by the National Safety Council, nearly 400,000 dangerous accidents occur each year because of texting. Teenagers and Texting on Roads: The problem of texting while driving is not restricted to teenagers. However, they are affected by it the most. The fear of losing out to something interesting is so great that even though many acknowledge the dangers of driving and texting, they cannot stop. Let us look at some numbers when it comes to dangers of texting and driving for teens According to the American Automobile Association (AAA): Over 95% of teenagers are aware of the risks associated with driving and texting. However, more than 35% were arrogant enough to say that they keep on doing it. The number of teenagers involved in fatal accidents who had been using their mobile phones was over 21%. Compared with their adult counterparts, teenagers were more likely to be involved in texting and driving accidents by 4x times. If there are other occupants in the car, the probability of a texting and driving accident increase by 5x times. How Counselling by Parents can Control this Dangerous Epidemic? While teenagers are to be blamed for this reckless activity, many experts feel that their parents should impart this basic understanding of the dangers to them. It is very important for parents to set a good example for their teenage children while using an automobile. Kids often pick up the habits of their elders. This includes the use of a cell phone while driving. If you are a parent, you should avoid using cell phones while you are driving with your kids. Unless it is a very important call, or a text, or an email, you should not address it. Even if you have to, pull over to a safe side of the road, bring the car to an idle, and then engage on your cell phone. This will make your kid understand from a very young age about good habits and practices. It is also a good idea to set some ground rules for your kids when it comes to driving. Teenagers are very safe when it comes to taking their rights away. You can tell them that if they are caught using their cell phones while driving, they will not be allowed anywhere near the car for a month. The quantum of punishment can wary, but parents need to be tough, in order to protect their children. Dangers of Texting and Driving: The Final Word Due to the changed rules of society and social media, teenagers are already under a lot of stress. They have self-doubt issues, depression, and other pressures. All these play a role when it comes to their driving. It is imperative for parents to talk to their kids and tell them that answering a text after five minutes would not change a thing. The need to be always updated to social happenings is not more important than their lives. No one is invincible, and talking about statistics of the dangers will help them understand the problem better. If you are a parent, you need to start setting examples and ground rules for your children. Read Also: Best New Cars For Teenagers 7 Reasons Why Teenagers Pay Extra For Car Insurance The Effects Of Drinking And Driving Under The Legal Age Of 21

READ MOREDetails
Excavator

What Industries Use Excavators?

If you’re interested in knowing more about the uses of the excavator, you can read more here in this article. Excavators are very useful machines in many industries such as construction or mining. This is because of its ability to dig and lift a large volume of materials. How do excavators work? What are they used for? The answers to those questions will be found if you read more here below. What is an excavator? An excavator is a piece of heavy equipment that is often utilized in many industries. As the name suggests, it is able to excavate and lift materials. It consists of a bucket that is attached to the undercarriage by the boom. The undercarriage has tracks or wheels to move through difficult terrains. Most excavators have diesel engines that power the machine through hydraulic pressure. Industries that use excavators: Excavators have many applications across many industries. Below are several examples. Construction In the construction industry, excavators have many uses. Firstly, they are used to demolish old structures and remove debris. They are also used in normal grading work and landscaping before a new structure is erected. Excavators are used to removing heavy materials such as debris, soil, and construction materials. After the landscape is prepared for construction, excavators are again used to dig foundations and holes. They are also used to install heavy piles in foundations. In heavy-duty construction jobs, the type of excavators that are used are Mining Excavators are also very crucial in the mining industry. Without excavators, it is impossible to dig through the soil to find valuable resources. The mining industry often operates in areas with uneven terrain. Excavators are used to landscaping these terrains and move heavy debris and soil. Forestry Forestry is another industry that makes heavy use of excavators. Excavators are used to removing and carrying heavy wood and logs. They are also used to dredge reservoirs and excavate soil in avalanche-prone areas. Types of excavators: Here are several types of excavators. Different types are used for different industries and functions. 1. Crawlers Crawlers or compact excavators have two tracks rather than wheels. They are often used in construction and mining jobs to lift soil and other materials. The chain tracks enable crawlers to move through hilly terrains with more ease. 2. Dragline excavators They have a bucket that is attached to a hoist and a dragline. They are often used for dredging in heavy-duty civil engineering jobs. 3. Skid steer excavators This excavator has a bucket that faces away from the driver, which makes it useful in narrower sites. They are frequently utilized in digging and residential works in limited spaces. 4. Long reach excavators They have longer arms and boom. It makes them suitable for areas with difficult terrains and hard-to-reach sites. 5. Suction excavators Suction (vacuum) excavators are often used for underground applications to reduce the risk of damage. Now you know about the use of excavators in different industries. Hopefully, the information you get after you’ve read more here will be useful to you. Read Also: Which Type Of Forklift Your Industry Need: Have A Look At Them! Construction Safeguards: What Are the Top 3 Leading Risks for machine-related Amputation? Why Many Businesses Owe Their Success to Quality Scales Best Uses for Stainless Steel in Construction

READ MOREDetails