EMP Shielding: What It Is and Why You Need to Start Worrying About It as a Threat

Published on: 26 February 2019 Last Updated on: 09 August 2019
EMP Shielding

Hollywood does a poor job depicting the outcome of an electromagnetic pulse. Although our great nation has yet to face a threat such as an EMP, the danger is real and its results profound.

Though we would like to think an EMP would never be experienced in our lifetime, that just may not be the case. Should it happen, you need to be prepared.

We will look at the potential threat posed against citizens, and what to equip yourself with to survive with proper EMP shielding.

A Real Threat:

Since 1859, EMP’s have been an unstoppable force that can reset clocks and humanity. We discovered that our new technology, electricity, stood no match for the geomagnetic storm that came with something like a solar flare.

The first time we experienced such a power, it was no man-made scenario. The Carrington Event was the largest recorded solar flare ever recorded.

Telegraphs sparked, paper caught aflame, and bystanders situated close to electrical lines felt first hand the surge of electricity cutting through the atmosphere.

Through the years, the power displayed in the Carrington event had been harnessed. Nuclear testing gave way to the potential for EMP events to take place on demand.

Early in the cold war, the potential for widespread electrical malfunction was observed by both the US and Russia upon their nuclear testing. From that point, all efforts were put towards defending against an attack with one of these electromagnetic weapons.

Iran, India, Pakistan, Russia, Cuba, North Korea, and China, among other countries acquiring the resources needed, now all possess the knowledge, capability, and will to set an instrument like this into the war zone.

Militarized weaponization of the electromagnetic pulse is a fear of many. It could strike anywhere, any time, and leave the nation in the dark. The motto is: if you aren’t at least concerned, you aren’t paying attention.

Be Aware, Take Action:

There is little to nothing you can do about a nationwide blackout from an EMP. However, there is much you can do about the products and supplies you need to keep safe in case of such an event.

An EMP destroys all electronics connected to the grid, plugged into the wall, and any device using a microchip. While a low-tech blender not plugged into a wall may stay safe, things like your phone, hard drives, LED flashlights and radios will be toasted.

Luckily, technology has given us EMP shielding for the devices we need most. The Faraday cage is the best defense against an EMP event.

Insulating the object from the harmful gamma rays and ionized atmosphere that sweeps through the environment, the Faraday cage diverts the danger out and around the object.

A conductive outer shell is responsible for redirecting the damaging waves while the insulation keeps your device safe for life post-EMP. These “cages”, however, take many forms.

While some are crafted from ammunition cases and cardboard, a more portable, lightweight option has been tested and certified for protection.

Tech Protect EMP Protection Bags offer the ability to store the tools, devices, and support systems you need in case of an electromagnetic pulse.

Sizes from 8″ x 8″ all the way up to 38″ x 18″ x 14″ allow you to keep individual good protected, as well as critical power generation units that will be sacred in post-EMP life.

What you get with a faraday bag is the most versatile and easy to use tried and tested device for costs that let you be protected sooner rather than later. EMP bags are affordable enough to keep all of your solid-state bug-out gear function for the days ahead.

A New War:

The threat of traditional nuclear war has taken the back seat, as the EMP has been tailored to cause near the same effect without the unquestionable damage to all parts of the earth.

The impact of an EMP would cause mass casualties in each state affected.

As the grid and every system dependant on it for operation is no longer usable, people will rely on what they have to survive.

Those who have the best chance at survival are those who can bear winters, hydrate daily through the following years and summer swelters, forage or ration what food they can manage, and defend against those who want what they have.

Let’s break down the root of each of these dependencies we rely on and how the world will look should we not have these utilities.

First, we have our electrical, water, and sewage systems. All of these main utilities will cease to function as they depend on electricity to operate. As people turn their focus on providing sustenance for their own families, maintenance of critical facilities will not be provided.

With a collapsed economy, currency as we know it becomes useless. Food, ammo, tools, and supplies become bartering tender, as the traditional system of working and getting paid to buy products no longer applies.

The result of nonfunctioning utilities and economy is, in the case of an estimated 90% of the US, death. Starvation, dehydration, hypothermia, and murder will be exponentially elevated.

While this may just sound like scare tactics, the fact remains that our society as we know it could not function even close to the way it does and has for the past 50, 100, or even 200 years.

Taking a giant leap back in time would pose challenges the majority of the nation has never had to face, and ones we don’t even know first hand how to deal with. Desperate citizens will take desperate measures.

War is complicated, and our modern advancements have only added to the complexity. A nation with resources and much to lose is a vulnerable one when it becomes technologically set back.

Taking a critical look at our nation, it is important to know that the military is very aware and prepared for events such as an EMP. While you can not rely on others to be prepared, you can keep your self and loved one ready and trust in the wise folks who bear arms against additional threats.

Providing EMP Shielding For Tomorrow:

There should be no doubt; EMP preparedness is a wise move for anyone, anywhere. So how do you get your things in line for the day after such a great set back?

First, think about the things you and your family depend on for survival. In such an event, where would you get water? do you have enough food stored up to last, and are you able to hunt more when rations run dry?

These things are crucial. However, help may be provided in national guard deployed locations. A radio saved for this electrical rainy-day can give you guidance to the nearest shelter, and potentially guide you to a safe location should further threats pursue.

Keeping a hand-crank radio, or one with extra batteries, in a Faraday bag can drastically help you. Also, consider your families life-supporting needs. If a loved one relies on any sort of electronic life-supporting devices, it would be smart to have an extra stored away.

Keeping devices safe is important, but like your rations, things eventually die. Recharging your devices will then pose just as much of a challenge as the EMP itself. Preparedness in all areas can be covered though.

A solar-powered generator will allow you to charge batteries, flashlights, power banks, power tools, and plug-in life-saving devices. Portable solar generators can give your family the help it needs. Place one in an EMP protection bag and keep it stored!

Life Goes On:

Like any great disaster, war, or collapse, life eventually reestablishes itself as manageable. Communities come together, and families grow stronger. While an EMP is something no one ever hopes to face, the reality is that it could happen at any time.

EMP shielding will get you through the tough times by giving you back a piece of the world you know in times of major reset. Lives can be saved with just a simple duplicate stored neatly in a military-grade sealed and insulated conductive unit.

Not only does war give way to the need for preparedness, but the world is also ripe with other dangers that threaten our way of life in the form of an EMP, be it man, nature, or malfunction. That’s just the world we live in.

You have the knowledge and tools you need to defend against the worst of scenarios, get ready today. And while you’re at it, check out our blog for more great articles about health, wellness, lifestyle, DIY, and so much more!

Read Also:

Content Rally wrapped around an online publication where you can publish your own intellectuals. It is a publishing platform designed to make great stories by content creators. This is your era, your place to be online. So come forward share your views, thoughts and ideas via Content Rally.

View all posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Related

Furniture

5 Different Kinds Of Wood Used To Make Furniture

There are different kinds of wood used to make furniture. Each kind of wood offers different characteristics and is used for a variety of reasons. Different types of wood can be used to make the bed frame, the floors, and even the chairs that you sit on. These woods differ in appearance and quality, and if you are looking for furniture for your bedroom with the best quality wood, take a look at bedroom furniture at Luxo Living for some great design choices. 1. Oak Oak is one of the most common types of wood used to make furniture, but it also tends to be the most expensive. The wood is sometimes used to make small pieces like tables and chairs, but it is also very strong and is commonly used to make floors, door frames, and decks. It is a smooth, rich, deep red and has a distinctive smell that is markedly different from other woods. There are some limitations to the use of oak, in that it can only be used outdoors in certain temperatures, and it is susceptible to mold and mildew. 2. Rubberwood Rubberwood is a natural growth from a tropical hardwood tree that is mainly found in South America. It is an evergreen tree and comes in many different colors varying from white to yellow, and can even be found in shades of brown. It can also be used to make small pieces of furniture like coffee tables and writing tables but is commonly used to make furniture for rooms with a lot of humidity. The wood is very resistant to mold and mildew. 3. Birch Birch is another type of wood that is commonly used to make small pieces of furniture. These small pieces can include tables, chairs, and desks. The wood is light-colored and has a distinct sawdust-like smell that is not unpleasant. It can be used to make anything that gets wet since it has waterproofing properties. The wood is easily shaped and can be used to make different types of wood furniture, including bookshelves or cabinets. 4. Walnut Walnut is another type of wood frequently used to make furniture. It has a strong, hard texture that is very resistant to water and other conditions, which makes it a great choice for outdoor furniture and furniture that is put in humid conditions. Walnut is also very durable and makes a great material for everything from small to large pieces. This type of wood is often found in unfinished form since it is usually used in quite large pieces. 5. Cherry Cherry is another wood that is commonly used to make furniture. This wood has a light color and is resistant to mold and mildew, which makes it a perfect choice for indoor and outdoor furniture. The wood is sometimes used to make walls or cabinets but is mostly found in small pieces of furniture. This piece of wood is a popular choice for a wide array of projects and can be used for a variety of reasons. Read Also: Six Main Reasons Why You Need to Care for Environment How to start living off the grid The Effect of Climate Change on Human Health  

READ MOREDetails
dentures

Understanding Dentures And How To Take Care Of Them 

A complete set of teeth is essential for one to look more attractive and confident. It isn't easy to smile, speak, and eat in public when you have missing teeth. One of the easiest and affordable ways to bring back those smiles is through dentures.  Read on to find out more about dentures, how they can help you, and how to take care of them:  What Are Dentures?  Dentures are dental appliances customized to replace missing teeth. It can also help to restore the oral functions of a person. Dentures can be complete or partial. So, you would need a full denture if you lost most of your teeth. Meanwhile, you will need partial dentures if only a few teeth require replacement. How Do Dentures Work?  A complete denture is a flesh-colored acrylic that usually fits over the gums. The base of the upper denture covers the roof of the mouth or the palate. When it comes to lower dentures, it has a shape like a horseshoe to accommodate the tongue.  Dentures are tailor-made in a dental laboratory. The dentist will get impressions first of your mouth. Then, they will determine the kind of denture applicable to you. Perfectly created dentures will look like natural gums and teeth.  Price Of Dentures  The cost of dentures varies depending on the type of materials and the process. The average price is approximately $1.800 for a complete set of dentures. But, it can still vary according to the dentist, the maker, and of course, its price in the market.  Additional factors for dental cost are the following:  Teeth extraction, if needed.   Immediate dentures until the permanent dentures are ready.  Follow-up checkups for adjustments.  How Long Before You Will Get Used To Dentures?  Wearing dentures for the first time can be uncomfortable and awkward. It may take weeks or even months before you can get used to it. Speaking and eating with dentures can be challenging, so you need to practice. You may feel a bit bulky or loose since there’s an apparatus inside your mouth.  Excessive saliva is also one of the discomforts as your tongue is still getting used to it. But, if you notice some soreness, irritation, or other issues, it is best to consult your dentist as soon as possible. How Long Do Dentures Last?  Over time, dentures need to be relined, rebased, or remade due to wear and tear. As you age, your mouth will naturally change. As a result, your denture may come loose, or you may have some chewing or gum irritating issues.  You’ll need to clean your dentures regularly. This is to prevent food particles from sticking and to prevent the growth of bacteria.  As a rule of thumb, it is essential to visit your dentist every six months or annually if you have dentures.  How To Take Care For Your Dentures?  Dentures materials and your taking care routine two are going to determine how long your dentures are going to last. But every denture is delicate and not unbreakable. It can break while you are dropping it from your hand. So during the cleaning process, you always have to take precautions and keep your dentures wrapped in a towel. Dentures are delicate and could break if dropped. When handing it, you should put it in a basin of water or a folded towel.  It is best to brush your dentures every day to remove plaque and food particles. This is also the right way to keep them clean and unstained.  If you will remove your dentures, be sure to put them in a soaking solution for dentures or in plain water. Do not let your dentures dry out. Putting them in warm water can cause them to warp.  If your denture cracks, chips, or breaks, do not attempt to fix it on your own. It is always best to see your dentist right away when this happens.  Conclusion  Dentures are the best option if you are looking for an affordable solution to bring back your confidence. Proper care is crucial if you want your dentures to last for several years. Regular visits to your dentist are also a must. Read Also: Essential Things to Consider Before Getting Dental Implants What do you need to know about Dental Implant Surgery? Dr. Maria Luong Discusses Ways to Avoid Dental Problems by Keeping Dental Plaque and Tartar Away

READ MOREDetails
the Perfect Place to Have Your Wedding

Finding the Perfect Place to Have Your Wedding

Most people hope that they're only going to get married once, so finding the ideal venue can be quite difficult and somewhat of a challenge at first. Finding a great wedding venue isn't something that you're supposed to be experienced at, and if you're not keen on the idea of hiring a wedding planner to help you out, you will find yourself with a long task list and many visits to undertake. Here are some of the ways that you can ensure you find the perfect place to have your wedding. Know how many people you're inviting One of the worst things is feeling like you've hired a venue that is too large or too small. The feeling of being cramped at a wedding can ruin the whole day for everybody, and the feeling that you're got lots of empty unused space can be just as bad. Even if you haven't had all the RSVPs yet, you should have a good idea of who is going to becoming. Your immediate family and extended family members are almost a certainty, and many of your close friends wouldn't miss the day either. Choose somewhere you like It's the most important thing that you like the venue you choose. Whether you're looking for ballroom hire Melbourne to have a classy wedding with plenty of space for dancing and having fun, or you want to get married on the coast somewhere with a beautiful beach and plenty of sand, there are many options to consider and at the end of the day you need to think about what you like and where you would like to be celebrating the big day. Check the availability If you see something online that you think will be perfect for your wedding day, phone the venue and check the availability before you arrange to go and visit it. If you fall in love with the venue only to find out that there isn't any availability for the date you're getting married, you'll always be disappointed and it could lead to wanting to change the date and then having disagreements with people who might not be able to make the new date. Unless you don't have a date set and you are very flexible, it's always a good idea to check which venues are available for the date you need and then take it from there. Pay a visit to your favourites When you've made a shortlist of all the places that you think would be ideal for getting married, pay them a visit and take your time walking around and thinking about whether you could actually get married and celebrate the day at this particular venue. It's a good idea to take along your future spouse as well as a friend or family member who can help you to decide which venue would be the best. Not only will they have some ideas to share but also they will always spot things you might miss and will be able to discuss it in further detail with you after the wedding venue visits. Read  More: Five Important Wedding Catering Considerations For Event Planning Save Money Buying Engagement Rings And Wedding Bands Using These Ingenious Tips Salwar Kameez Styles An Indian Bride Must Have In Her Wedding Trousseau Give Amazing Look Using Balloon Centerpieces In Wedding

READ MOREDetails