HVO Fuel Uncovered: The Secret Fuel That Could Change Everything

by

30 October 2023

Energy

HVO Fuel

The “fight” for a cleaner planet has been going on for a long time. People are trying to beat themselves because they and the things they use are the main polluters. Cars and everything that uses fossil fuels are among them, considering their emissions of exhaust gases into the atmosphere are huge.

At the global level, governments make efforts to reduce dependence on fossil fuels, knowing these are the biggest polluters. That’s why the desire to find alternative sources of energy from renewable sources has been present for a long time. While there are already certain options in use, as you can read here, new solutions are constantly coming up with improved performance and lower CO2 emissions.

Alternative fuels are essential for sustainable carbon-free energy supply and reduction of greenhouse gas emissions. And while you’re probably already familiar with their use, HVO (which stands for Hydrotreated Vegetable Oil) might be new to you. This low-carbon liquid fuel has gained attention lately because it seems like the long-awaited solution to pollution issues.

About The HVO Fuel

About the HVO Fuel

HVO implies using cooking oils and similar fatty waste as fuel. That’s not an entirely new concept since the use of processed vegetable oils in diesel engines has been known for more than a century. Nevertheless, it’s a new hype among eco-conscious consumers because it’s plant-based and very clean. Its CO2 emission and the number of PM particles are almost 90% lower than diesel and kerosene, fossil fuels that are still widely used.

The base of HVO is vegetable oil, that is, used cooking oil, such as sunflower, peanut, grapeseed, etc. However, it can also be made of both food-grade and non-food-grade oils (like palm or soy), animal fat residues, and tall oil. In their original state, these liquids could not be used as fuels, so they undergo hydrotreatment. It serves to change their consistency and composition for use in standard diesel engines.

Hydrotreatment involves the use of hydrogen to eliminate oxygen from the oils. This treatment takes place at very high temperatures, and then glycerides, or fat components, are separated. That’s a refining process that leaves this new fuel with minimal impurities, meaning that, during its combustion, there will be no harmful by-products and gases. That means less damage to the engine itself but also drastically less pollution.

The Use Of HVO

The Use of HVO

In general, HVO represents an alternative to fossil fuels, especially diesel, one of the major pollutants globally. So this new energy source can be used in all engines made for diesel. It means that its most common application will be in car engines. Still, it has found its purpose in off-road and agricultural machinery, boats, and generators. Some of the major truck makers have already made vehicles powered by HVO, as in this biodiesel-powered racing truck.

This new fuel from reputable manufacturers like SyntechBiofuel.com is equally usable in modern diesel engines as well as in older types that don’t have electronic fuel injection. They will have almost the same performance in operation as if regular diesel was used, only with much less damage to the engine, the entire circuit, and the environment.

Alternative fuels also have a huge potential to become the primary energy source for heating systems. Oil and gas still dominate in this area, but more and more households and industrial facilities are turning to alternative solutions. For instance, heat pumps are a popular yet costly solution.

HVO can be an even better and more cost-effective option if you plan to go green, that is, to switch to it from standard heating systems that use oil or kerosene. This venture won’t cost you extra money because there’s no need for system modifications and add-ons, as would eventually be the case with heat pumps.

Benefits Of Switching To HVO Fuel

Benefits of Switching to HVO Fuel

As said, using HVO cuts the emission of harmful gases by up to 90%, depending on what makes the base of this fuel. That results from clean combustion because there are no impurities and PM particles in this processed liquid. Moving on, it means that engines will utilize a higher percentage of fuel, so their consumption will be lower. Simply put, HVO is a cleaner and more economical solution than diesel.

This fuel is also sustainable, as it’s made from waste (used cooking oil and animal fat). It also emits much less greenhouse gases than other fuels. As there’s no carbon in HVO, there are no toxic and potentially carcinogenic combustion by-products.

Another advantage of using HVO in standard diesel engines is that there is no need for their upgrades. But if you plan to use it as a replacement for heating oil in oil-fired boilers, there might be some minimal changes to your existing system. In any case, this can bring significant savings to both individuals and companies that, for some reason, have relied on fossil fuels until now.

Because it doesn’t contain oxygen molecules, HVO has a fairly long shelf life. So you can store it in specialized containers for up to 10 years without fear it will lose its properties and viscosity. For the same reason, HVO’s freezing point is lower than that of ordinary diesel. Also, it won’t harm the environment in case of accident spillage or leak.

How HVO Differ From FAME?

FAME is biodiesel, which isn’t the same as HVO, although there are certain similarities. For starters, both are plant-based. But what makes a significant difference is how they’re made. FAME utilizes esterification, which turns fatty molecules into esters and keeps oxygen molecules in it.

As explained, HVO is obtained by a refinery process that removes oxygen from fats, leaving them ester-free, clean, stable, and non-prone to oxidation. So, unlike FAME, hydrotreated vegetable oils can’t spoil, thicken, or degrade during storage.

HVO is the fuel of the future, and there are many good reasons for that. It’s a clean, non-toxic, sustainable, and economical alternative to diesel. It contributes to reducing the global carbon footprint, bringing no harm to the living world and the environment.

Read Also:

Ankita Tripathy loves to write about food and the Hallyu Wave in particular. During her free time, she enjoys looking at the sky or reading books while sipping a cup of hot coffee. Her favourite niches are food, music, lifestyle, travel, and Korean Pop music and drama.

View all posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Related

solar panels for outdoor

8 Tips For Choosing Solar Panels For Outdoor Activity

There is no need to carry your heavy, bulky generator anymore. With solar panels from the market, you can now find a way to have a hassle-free trip when you go out. Solar panels for the outdoors are the best thing that you can bring along with you because they will be able to power up your devices while you are outdoors. How To Select The Solar Panels For Outdoor Activity? Solar panels are great for powering small devices like cell phones, GPS units, and hand-held radios. Solar panels can be used for camping, hiking, and other outdoor activities. The solar panels for outdoor activities must be able to withstand some rough handling.  1. Choose The Right Size And Shape For Storage Ease When you're looking for solar panels for outdoor activity, the first thing you'll want to consider is the size and shape of the panel. The most common size is 15 inches by 15 inches, but you can also find smaller and larger sizes.  If you're planning on using a solar panel in a backpack while camping, smaller size is easier to carry. However, a larger size may be needed if you plan to use the panel in a stationary location or on a boat.  2. Get Flexible Solar Panels When choosing a solar panel, you need to think about your situation and how you will use it. The solar panels for outdoor lights should always be flexible. Unless you are not going to select the portable one, you cannot get the full advantages. For example, if you're going to be camping, you want to make sure you get something that's small, lightweight, and portable. Camping flexible solar panels at Sunyee are going to be the best option for outdoor activity. Flexible solar panels are the best choice for outdoor activity. The reason is that flexible solar panels are very light, strong, waterproof, and can be bendable to about 180 degrees. This is the coolest thing about flexible solar panels for the outdoors. In the past, you could only find rigid solar panels for sale.  They were heavy, noticeable, and not very portable. Due to the advancement in technology, flexible solar panels are now made. They are very light, portable, and durable. The best part is that they can be folded and carried around easily.  3. Understand The Different Types Of Portable Solar Panels Just like any product, there are different types of portable solar panels to choose from. Each of these comes with its own set of advantages and disadvantages.  Understanding them is the key to choosing the right one for your needs. The first thing which you should consider while selecting solar panels for outdoor and their capacity.  This is measured in watts. The higher the capacity, the faster your gadgets will charge. The second thing to consider is the material used to make the panel. Generally, portable solar panels are made of silicon and aluminum.  Each of these comes with its own pros and cons. Silicon panels are more expensive than aluminum panels but are also more durable. Aluminum panels are cheaper but are not as durable. There are many different kinds of solar panels to choose from. You can choose between monocrystalline, polycrystalline, along with thin film solar panels. Monocrystalline panels have higher energy efficiency with a lower amount of weight than polycrystalline panels. Thin film solar panels are the lightest, but they are also the least efficient.  4. It Should Be Compatible With Your Electronics Another thing you need to consider when choosing a solar panel is if it's compatible with your electronics. There is a wide range of solar panels for outdoor available on the market, and each of them may be compatible with different electronics.  If you own a smartphone or tablet that is not compatible with solar power, you can always buy one with a bigger capacity. Most solar panels are compatible with multiple devices; just remember to check the specifications before you buy one.  5. Check How Long It Takes To Charge And Remains Without Charge If you are going to use a solar panel for outdoor activity, say camping, hiking, fishing, etc. The battery should be able to charge fully, which means at least 8 hours (for those with a low-capacity battery, it is better to bring a solar charger).  But it is better to have solar panels outdoors that can remain at no charge for over a month, which means the battery should be at least 20,000mAh capacity. When purchasing replacement solar panels for outdoor lighting, the battery capacity is the first thing that you must check. For example, small solar panels for outdoor lighting are more like a decorative part, so when you are starting to add these to your garden, you should always understand what the life span is and how long it will take to get the full charge. 6. Consider the price Solar panels are a great option for powering outdoor gear and cutting down on the costs of outdoor activities. You can power all kinds of things with a solar panel. The biggest concern is being able to power what you actually want to power.  You'll need to know the wattage of the device before you can start looking for solar panels. The cost of solar panels is one of the main concerns of people who want to install solar but are not sure if it is worth the investment. The price of solar panels and related equipment can put a big dent in your pocket.  But it is also true that solar power is one of the most cost-effective ways to produce electricity. So, if you are planning to install solar panels outdoors, you have to decide how much you are willing to spend.  7. Durability Durability is the first thing you need to consider when choosing solar panels outdoors. Solar panels are not cheap, and you don't want to make a bad investment. It is very important to check the glass on the panel. It should be durable and thick, made of tempered glass that is scratch resistant and won't crack under pressure.  The glass needs to be strong enough to withstand wind and to keep the solar panel protected. The panel frame should have a good warranty and be sturdy, but most importantly, it should be made of rust-resistant material.  It must be able to withstand the elements and keep the solar panel safe from rust. The whole frame needs to be strong, not just the legs. A good warranty is also very important, don't settle for less than 25 years.  8. Setting up When choosing your solar panels for outdoor, the most important factor to consider is how easy it is to set up. If you are going to be using your solar panel for outdoor activity, it will most likely be set up in a place that is not easy to reach.  You don't want to be carrying a heavy solar panel with you while you are hiking or camping. It would help if you also were looking for a solar panel that is light enough to carry around your neck. There are a bunch of solar panels out there that are pretty much ready to go. Just unroll your solar panel and put it in the sunlight. Wrapping It Up: These are the qualities that you must check before selecting solar panels outdoors. Outdoor solar panels are not only user-friendly. These solar panels are the ultimate solution for any place where frequent power cuts happen. Which types of quality do you match up with while selecting any outdoor solar panels? Let us know through the comment sections. Read Also: Prepare Your Solar Panels for the Fall10 Steps To Take To Set Up Solar Panels At HomeHow Much Do You Save With Solar Panels? The Ultimate GuideWhat You Should Know about Solar Energy for Schools Benefits

READ MOREDetails
An Ultimate Guide To Instant Hot Water Dispensers

Ultimate Guide for Instant Hot Water Dispensers

Having hot water ready and waiting can make everyday life much easier. But heating tanks of water that mostly sit idle wastes energy. This is where on-demand hot water dispensers excel. They provide instant hot water as needed without standby energy losses. However, installing an efficient hot water system in your home or office lets you enjoy this convenience sustainably. Therefore, read on to learn what makes tankless water heaters eco-friendly and how to pick the best model to maximize energy savings. Why Instant Systems Beat Tanks Standard hot water tanks heat and store 30-50 gallons of water constantly. This maintains availability but isn't efficient. The standby energy needed to keep large volumes hot all day adds up. However, the  US Department of Energy estimates tank water heating accounts for 18% of home energy bills on average. Enhancing your home's efficiency and saving on energy bills becomes a breeze with hot water dispensers, particularly the instant or tankless variety. Instant or tankless water heaters avoid this waste by heating water directly on demand instead of storing hot water. Compact and wall-mounted, they detect when a tap is opened. However, an internal heating element quickly warms the water flowing through to the desired temperature only as needed. Top benefits of instant dispensers include: Energy savings from not heating excess stored water Continuous hot water - it never runs out with an endless supply. Compact size takes up less space Long lifespan of up to 20 years with no tank corrosion Lower monthly bills and environmental impact Tankless instant systems can reduce household hot water heating costs by 30% or more. Key Factors When Selecting An Eco-Friendly System With so many instant heater models available, it's helpful to understand which features impact energy efficiency: Energy factor – A higher rating means greater efficiency. Look for 0.95 or more. Flow rate – GPM determines how much hot water is produced per minute. Higher is better for larger homes. Temperature settings – Lower heat settings use less energy. Models with a range are the most flexible. Safety controls – Sensors that modulate power use based on demand improve efficiency. Size – Right-sized units are most efficient. Undersized heaters have to work harder. Energy sources – Electricity or gas. Electricity offers environmental benefits. Buying the correctly sized hot water dispensers with an energy-efficient design maximizes potential savings. Read Also: Pros And Cons Of Mini Splits For Cooling Tips For Maximizing Efficiency Beyond choosing a quality efficient instant water heater, certain usage habits also optimize savings: Set temperature only as hot as needed Insulate pipes to reduce standby losses Schedule a vacation mode to save energy when away Limit excessively long showers that deplete capacity Have the unit flushed and maintained yearly Consider adding a recirculation pump if distances from taps are long Proper installation and maintenance ensure your system runs at peak efficiency for the long term. Smart Technology Provides Added Control Advanced instant water heaters offer built-in Wi-Fi connectivity and smart features. These provide greater control and customization for increased efficiency. Look for models with: Remote temperature adjustments via phone app Voice activation through virtual assistants Usage tracking to identify savings opportunities Away modes to conserve energy when traveling Diagnostic alerts to prevent issues causing waste Smart water heating provides detailed insights and controls at your fingertips, wherever you are. Winterizing Your Instant System In cold climates, taking steps to winterize instant water heaters prevents energy waste and damage from freezing. This may involve: Installing indoor models in conditioned utility rooms Insulating outdoor water lines and pipes Setting a vacation mode low temperature Adding antifreeze formulas to the system Draining water and blowing air through pipes before hard freezes Maintaining optimal airflow around outdoor wall-mounted units A frozen broken water heater wastes all the energy it took to produce and install it. Proper seasonal maintenance sustains energy efficiency. An Eco-Friendly Solution For Hot Water Needs Instant tankless water heating systems represent a sustainable upgrade from outdated storage tank heaters. Their compact on-demand operation slashes energy consumption and bills. Choosing Energy Star-certified models sized for your household with high-efficiency ratings and smart capabilities optimizes savings. With some energy-conserving usage habits, you can enjoy endless hot water with minimal environmental impact. Advanced Installation And Maintenance Tips Proper installation and maintenance help ensure your instant hot water system operates safely and efficiently. Hire qualified professionals for complex venting and wiring needs Follow all local building codes and permit requirements Insulate connecting pipes to prevent heat loss Flush annually to prevent scale buildup reducing efficiency Check the energy guide sticker to confirm optimal electricity amperage Keep intake openings clear to allow proper airflow Vacuum exhaust ducts to remove accumulated dust Replace water filters as needed Regular maintenance prevents future issues that could compromise energy performance. Additional Energy And Cost-Saving Strategies Beyond the instant water heater itself, completing your system with certain components increases efficiency: Recirculation pump - Circulates hot water through pipes back to the heater so it's instantly available at taps. Drain water heat recovery - Recovers heat from draining water to pre-heat cold supply water entering the system. Solar pre-heating - Solar collectors warm up cold water before it enters the instant heater, reducing the electricity needed. Insulated pipes - Limit standby heat loss from pipes between heater and fixtures. Low-flow fixtures - Reduce water demand so the heater doesn't have to work as hard. Layering on complementary energy-smart devices and practices amplifies your instant hot water system's eco-benefits. Frequently Asked Questions What maintenance do instant water heaters require? Annual flushing of the heat exchanger and checking electric connections, temperature settings, and airflow around the unit are essential. Filters should be changed following the manufacturer's guidelines, typically around once a year. Do instant heaters work well in cold climates? Yes, but outdoor pipes and units need insulation and proper air sealing. Some installations in northern regions place heaters in utility rooms instead of mounting them outside. How difficult is it to install an instant hot water system? It's recommended to hire a professional for the complex venting and electrical work unless you are very experienced. Typical installs take a full day. Final Thoughts Tankless instant hot water dispensers provide an energy-efficient and sustainable upgrade from outdated tank heaters. Combined with eco-friendly usage habits and proper maintenance, they deliver significant cost savings and environmental benefits. Adopting a whole-system approach maximizes efficiency. Read Also : Know Why Content Marketing Is Important For SEO 4 Points To Consider When Creating A Great Content Marketing Strategy Today How To Deal With Debt By Doing Business Marketing Smartly?

READ MOREDetails
Energy Provider

How to Choose a Clean Energy Provider for Your Texas Home or Business

Keeping Texas clean is a priority for most Texans. Clean energy is one way to do that. Choosing clean energy helps lower carbon emissions, which helps to slow climate change. It also lowers overall energy costs and helps create a steady energy supply in the future. It can be cumbersome to sort through all the information on the internet to find an energy provider who uses renewable sources. Having a general idea of where to start and what you are looking for can really help you figure out what energy company to go with as you try to use clean energy in your home or business. You can find cheap energy companies in Texas and compare energy rates by making good use of energy comparison websites. Understand Clean Energy Clean energy, also called renewable energy, is generated from naturally replenished sources. These sources include solar energy, wind, water, nuclear, bioenergy, and geothermal sources. All of these energy sources are practically limitless instead of fossil fuels, which can take billions of years to renew. When looking for a clean energy provider, it is good to start by looking at their energy sources. If they mention a specific kind of renewable source, it is safe to go with that option. You must be sure where your energy is coming from if clean energy is essential to you. Make sure you don’t just take them for their word if they use buzzwords like “clean energy” in their marketing materials. Companies may get a small amount of their energy from renewable sources so that they can make that claim. However, it would be best if you went for a company that gets at least 50 percent of its energy from renewable sources if you want your energy source choice to make a meaningful impact on the environment. Find Providers Near You When searching for a clean energy provider, the first step is to determine what companies provide energy services for your area. Unfortunately, some more rural areas may not have the option to choose a clean energy provider. For locations with that option, search for "clean power companies in Texas,” like Chariot Energy or a comparable source to power your home or business. With any power company you find, make sure that they are rated for both business and residential areas. Investigate Your Options Find out what companies provide energy services for your area. Look for their story and see how long they have been working in clean energy. Look for businesses they work with and investors or politicians they have ties to. Their associations can tell you a lot about how serious the company is about clean energy. You should also look up independent sources to get ratings on their clean energy track record. Search for individual companies on independent review websites and the Better Business Bureau to get an accurate idea of what they truly stand for. You also want to make sure they have an excellent customer service track record. Compare Offers and Plans Once you have decided on the power company you want to use, you will have to compare its plans. Some companies offer “green pricing,” which allows customers to pay a premium to use only clean energy. This premium helps companies with the added costs of switching to green energy and with the addition of other clean energy sources to their mix. Suppose you can’t find a company that offers clean energy, or you want to give a little extra help to the industry as a whole. In that case, you can also purchase green certificates, which help companies around the country transition to clean energy. The Texas Choice Deciding to move to clean energy is good for the environment and good for Texas. It can be confusing to sort through all the information out there, but if you stay organized and sort through the data in smaller chunks, you can find the right energy company. It can save you money and save the wide-open spaces of Texas in the process. Read Also: The Dallas Texas Resource for Metal Conex Boxes What You Should Know About Solar Energy for Schools Benefits

READ MOREDetails