2018 Tesla Model S: The Complete Electric vehicle

11 January 2019

Tesla has an impressive range of electric cars with decent power and along with that, the cars are friendly to the pocket. Tesla has been in the market for the past few years but has not succeeded in impressing the buyers. However, with the recent launch of Tesla Model S, which is an electric variant car and a medium-sized sedan, it has started to gain the popularity. A major reason behind this is, the affordable price and that that car offers ample amount of features which are otherwise not seen in the other electric cars in the market.

Pros:

The car is an electric variant. It is a medium-sized luxury sedan which has an impressive range on the high-end models of the car. The acceleration is quick and thus, the power of the engine has been done justice with the gas pedal system. Talking about the space, the liftback design is an added advantage. It offers an abundant cargo space to the customer. Moreover, there are a few Tesla exclusive technologies and general technologies which are not available in other luxury cars.

Cons:

There are similarly priced sedans in the market too. A major setback which can be predicted is that it is an electric car. The electric cars have not gained popularity and always considered weaker against the gas-operated car. Moreover, the luxury polish is not clearly visible such as in the other cars having the similar price tag. If we look into the aftersales part, the service centers are not present all around the world. This is because of the number of dealers in the car also less.

Trims:

Till the time Tesla had launched Model S, the electric vehicles were not preferred. The gas-operated vehicles were always given the priority despite the operating cost and the base price of the cars. After Tesla Model S was launched in two different trims, the potential buyers of the electric vehicles got an option to buy one of the best electric cars in the market. The basic model of the Tesla Model S is the 75D. The car is EPA-rated at the range of 229 miles. This means the fuel economy of the car is 229 miles. The higher version which is 100D can run 331 miles in one charge. This is the middle ground between the basic and the top model and thus, has all the necessary features. The top model of the car is the P100D. Talking about the acceleration of the car, when the Tesla Model S is completely charged, it can accelerate from 0 to 60 mph in the period of 2.5 seconds. The time taken by the car is lesser than most of the exotic cars priced at even higher rates than the Tesla Model S MSRP.

Software:

The most important thing about having an electric car is the continuous software updates. From the Tesla Model S review, it is known that Tesla is known for releasing new software, bug fixes and the addition of features in each software upgrade. The firmware update adds more features into the car. An added advantage of having an electric car over the gas-operated car is that the number of features keeps adding. Whereas, in the gas-operated car, once you buy the car, you will not see any features being upgraded. In the electric car, if there is an inconvenience, it will be fixed by the software itself up to some extent.

Interior:

Tesla model s interiors have been given top ratings by the reviewers. The advanced features in the car, ask for a bit of learning but once you are well-versed with all the features, you can enjoy the cabin with lovely materials and the infotainment system within an arm’s distance. The infotainment system can be used with the help of a 17-inch touchscreen. The whole electronic network works great. However, you can face the problem when it comes to the power exterior door handles. They deployment is delayed. The cabin is huge and gives a wide-open feeling with a ton of legroom and headroom.

Safety:

Considering the safety of the car, it is equipped with 5 airbags. Apart from the airbags, the car also has other standard active safety features such as 4-wheel ABS, 4-Wheel Disc Brakes, Brake Assist, Electronic Stability Control, Daytime Running Lights, and lane keep assist along with other numerous Tesla exclusive safety features.

Read Also:

Ariana Smith

I enjoy writing and I write quality guest posts on topics of my interest and passion. I have been doing this since my college days. My special interests are in health, fitness, food and following the latest trends in these areas. I am an editor at Content Rally.

View all posts

Effect of Australia’s New Inland Rail on the Trucking Industry

Spanning 18,000 Km from the east coast to the west coast, Australia is the fifth largest country in the world. Incidentally, the bulk of the population is settled in major cities along the coastline. The vast distances between major cities in Australia led to the development of the country’s robust inland freight networks. Australia plays a key role in the global economy and is the 20th largest exporter in the world. In 2017, the country made a positive trade balance of $44 B after exporting $243 B and importing $199 B worth of products. The country relies on its road and rail networks to mobilize all these products across the country efficiently. Significance of the Melbourne to Brisbane Inland Rail In a bold inland rail project to link Melbourne and Brisbane, Australia has invested about $10 Billion. The project will cover 1,700 kilometers to connect more than 20 major towns across three states, namely Victoria, New South Wales, and Queensland. The inland rail will streamline several bottlenecks and time constraints that have hampered freight transport between Melbourne and Brisbane. The project is also expected to create more than 10,000 jobs and boost Australia’s GDP by more than $16 Billion in 50 years. Australia’s Road Vs Rail Debate The development of the inland rail has fuelled the road vs rail debate in the freight industry. The debate questions on the efficiency and costs of using trains over trucks. Additionally, there is a concern on whether the new inland rail will put the heavy-duty truckers out of business. However, there is a lot of room in the country for both systems to coexist. With a few relevant adjustments, the road and rail systems can be integrated and complement each other. In effect, the new rail system in effect may enhance the trucking industry rather than retard it. Advantages of Rail and Road Freight Systems Both road and rail freight systems have niches where they can outdo each other. The following list highlights a few areas where it is advantageous to use road over rail transport and vice versa. Advantages of Road Transport 1. Efficient over short distances: Road transport offers several flexibility advantages that trains cannot match. Trains operate on a fixed rail line that cannot handle door to door deliveries. 2. Fast Scheduled Delivery: Trucks can deliver goods according to your schedule. This can save you from unnecessary storage costs. With rail transport, you have to adjust your programs to fit the train’s schedule. Advantages of Rail Transport 1. Cost-effective over long distances Using trains beats trucks over long distances. Trains carry more cargo and are up to 4 times more fuel-efficient than trucks. Also, the wear on your aftermarket parts for European trucks can be expensive over long distances. 2. Eco-Friendly: Trains are more environmentally friendly than trucks as they emit up to 75% fewer greenhouse gases. Also, trucks consume close to 9 times more energy per tonne-kilometer than trains. There are several ways in which the trucking industry can adapt to benefit from the development of Australia’s new inland rail system. For example, there will be immense opportunities to move cargo from to and from the train stations. Truck operators can extend the life of their vehicles and duration between services by plying shorter routes. Read Also: Freight Factoring Is Solving Common Trucking Challenges What To Consider When Buying Heavy Duty Truck Alignment Equipment Why Times Are Tough For Truckers And Why It Concerns You

Get to Know Interstate and Intrastate Heavy Haul Transport

Heavy haul fleets offer interstate and intrastate transport choices, and both cover different regulations and protocols. Interstate hauling refers to the trucks that cross state lines in delivering cargo. Intrastate, meanwhile, means the fleet operates locally. Its permit and operational limitations don’t allow it to cross state lines. They also differ in terms of regulations they have to comply with. Regulations Covering Interstate Heavy Haul Fleet: The Federal Motor Carrier Safety Administration is the primary agency that oversees and monitors interstate heavy hauling fleets. Trucking companies need to comply with the Federal Motor Carrier Safety Regulations and the Hazardous Material Regulations. Of course, each state has its regulations, fees, and permits covering cargo trucks that pass its borders. Regulations Covering Intrastate Heavy Haul Fleet: For intrastate operations, the state has the primary responsibility to ensure that the fleet is following all rules and regulations governing transport. Typically, the rules and regulations are the same as the Federal Motor Carrier Safety Regulations. But some states, due to the products they move, have stricter quarantine regulations. They also have different rules on the number of hours a truck driver needs to be on the road, the health qualifications, and age limits. What is a DOT number? The Department of Transportation, where the Federal Motor Carrier Safety Administration is attached, assigns different numbers to heavy haul trucks. For instance, there’s a particular number if the truck is transporting hazardous material across state lines. The same goes for the weight of the cargo or if the truck is carrying 9-15 people. For intrastate trucking operations, the regulations vary. Some states don’t require a DOT number and some do. The DOT number should not be confused with the DOT certification. If the fleet is DOT certified, it simply means that the truck driver possesses the competence, skills, and knowledge to drive such a big vehicle across the country. Truckers can’t secure a commercial driver’s license without this DOT certification, and they have to renew their permit every two years. State authorities always check the DOT certification when they flag down delivery trucks and heavy haul fleet. Fees: In terms of fees, it stands to reason that when the fleet routinely crosses state lines, it is subject to much higher fees. To illustrate, their insurance coverage is higher because they are exposed to more risks. The longer the truck driver is on the road, the higher the risks he would be exposed to. Each state also has its fees, surcharges, and levies. For intrastate cargo, the fees, license plate, and insurance coverage are lower. Again, each state has its own rules covering fees, so for the most part, the trucking company only has to worry about those. These regulations are necessary considering that the trucks remain the primary mode of transport for cargo across the US. For example, statistics show that trucks carry 80% of the total cargo that’s shipped around the country. The industry is also worth $726 billion every year. Read Also: Why Times Are Tough For Truckers And Why It Concerns You How Servicing For Your Commercial Boiler Works: A Step-By-Step Guide To The Process

6 Reasons Why Vehicles are now Safer Than Ever

As the decade's progress, it seems like cars are getting more and more lightweight. And although it’s tempting to equate weight with durability, lighter does not necessarily mean more fragile. 1. Metals have changed : When you think of old cars, you probably think about hard, durable steel. Those old cars were built a lot more like tanks than the modern vehicle. And while it’s true that the cars of a bygone era were made of durable steel, the steel of today is even stronger. In the early part of this decade, the most steel used for automobiles clocked in at 500 megapascals. The steel of today measures around 1,500 megapascals. To create the complex shapes we’re seeing in modern vehicles, it’s stamped hot and then cooled quickly. Advances in steel and the addition of other materials, such as aluminum, carbon fiber, and magnesium, help to dissipate and redirect crash forces. Stronger materials and crumple zones make cars of today stronger than ever. 2. Crash tests are more advanced : Do you remember the crash test dummies of the ’80s? Well, let’s say those guys have been through the wringer. As safety features have increased, so have the crash tests. The National Highway Traffic Safety Administration began crash testing cars in 1979. At the start, they were basically ramming cars into barriers. Today, they have far more advanced methods that include virtual simulations and auto prototypes. More advanced crash tests can find flaws in a vehicle’s safety features, so the manufacturer can continue making improvements before they bring the car to market. 3. Crash avoidance is a thing : New technological advancements allow the vehicle to take over in cases where the driver may not react quickly enough. Lane-keep assist, automatic braking and blind-spot monitoring all help to keep the car out of harm’s way. In a modern car, if you fall asleep at the wheel, the car may keep you on track. This can avoid countless accidents. 4. Belts and airbags are better : Are you old enough to remember when cars only had lap belts? Much like the rest of the car, seat belts and airbags have continued to improve throughout the years. Now, three-point belts are standard and there are airbags for every spot in your car. There are side-curtain airbags, knee bags, and even inflating seatbelts that can spring into action depending on the intensity of the crash. 5. Crumple zones improve safety : The first car produced with crumple zones was the Mercedes 220. Upon impact, the vehicle would crumple in a way so as to absorb the energy of the crash. Today, all cars feature crumple zones to improve safety. The crumple zone is an area that’s likely to experience impact, and it crumples to lessen the impact felt throughout the vehicle. Crumple zones are created with a mix of different metals, including steel and softer metals like aluminum. If you’re in an accident, your car may experience a lot of exterior damage, but you are more likely to walk away from the crash. 6. Cars can talk to each other : Auto manufacturers are testing out technologies that will allow vehicles to communicate with each other. Imagine a scenario where your car can relay speed and braking information to the car behind you. You see a squirrel and slam on the brakes unexpectedly. In this exact moment, the person behind you takes a long sip of their coffee. They didn’t see your brake lights, but no worries because your car sent the message to their car. Their car automatically puts on the brakes to avoid an accident. Although this is future technology, it’s a great example of how cars are evolving to become safer. In addition to all the technological advancements, superior warranty conditions on modern cars are helping us keep them better maintained. So, if you’re in the market for a new vehicle, you’re in luck. Cars have never been safer than they are today. Read Also : Choosing The Right Anti-Theft Devices For Your Car In Houston TX How Do Self-Driving Cars Really Compare To Human Drivers In Terms Of Safety? Important Things To Transport During A Relocation

2018 Tesla Model S: The Complete Electric vehicle

Pros:

Cons:

Trims:

Software:

Interior:

Safety:

Contemplating an Aluminium Ute Canopy For Your Four-Wheel Drive Vehicle?

10 Reasons to Purchase a Used Car

Tags

Ariana Smith

I enjoy writing and I write quality guest posts on topics of my interest and passion. I have been doing this since my college days. My special interests are in health, fitness, food and following the latest trends in these areas. I am an editor at Content Rally.

Leave a Reply Cancel reply

Popular

Technologies For Creating A Startup Idea

How to Download Facebook Videos on Android?

7 Rules of Effective Ecommerce Web Design

The 10 WordPress Plugins Every Sucessful Blogger Uses

Follow Us

Recent

Best Ways To Become An Electrician In 2024

Role Of Sound Design In Creating Memorable Advertisements

Data-Driven Insights And Enhancing Customer Experience

Simplify Your Conversions: A Powerful Cryptocurrency Conversion Calculator

Related

Effect of Australia’s New Inland Rail on the Trucking Industry

Get to Know Interstate and Intrastate Heavy Haul Transport

6 Reasons Why Vehicles are now Safer Than Ever

2018 Tesla Model S: The Complete Electric vehicle

Pros:

Cons:

Trims:

Software:

Interior:

Safety:

Share this Article

Contemplating an Aluminium Ute Canopy For Your Four-Wheel Drive Vehicle?

10 Reasons to Purchase a Used Car

Tags

I enjoy writing and I write quality guest posts on topics of my interest and passion. I have been doing this since my college days. My special interests are in health, fitness, food and following the latest trends in these areas. I am an editor at Content Rally.

Leave a Reply Cancel reply

Popular

Follow Us

Recent

Related