Pros and Cons of Buying a Used Car

by

28 January 2019

Automotive

Used Car

Buying a used car can be exciting and at the same time can make you feel anxious. There are a multitude of considerations like its value, maintenance and others. Some second-hand cars exceed their purchase value while some can be considered lemons. One of the best ways to buy a used car is to go through a used car dealership, and if you’re looking for dealerships in the Greater Rochester area, you can visit the website thatsmyvision.com.

However, before you come to a purchase decision, you have to know the advantages and disadvantages of buying a used car.

Pros:

1. Cost Less:

New car buyers usually switch cars after five years, so if you’re paying 8,000 USD for a used one instead of a new one priced at 16,000 USD, then you can save half of your money to buy another car or save it to buy a nicer one after a couple of years. Used cars, on an average, are usually priced half compared to new cars.

Buying a used car can save you from long term financing fees and enables you to pay for your car faster.

Buying a used car

2. No hidden fees:

A new car deal might look and sound great, but most new cars will have hidden fees that are sometimes exaggerated, such as destination fees, dealer preparation charges, and shipping fees. Sometimes, hidden advertising fees up to 1,000 USD can even be included in the brand new car prices.

On the other hand, used cars will not have any hidden charges, except documentation fees that can cost a few hundred dollars.

3. Thoroughly inspected and certified:

Getting a certified used car from dealers assures buyers that they’re buying a thoroughly inspected and quality car for the price. Certified used vehicles have been reconditioned and inspected by their manufacturers or by a certifying authority. Additionally, dealerships that sell certified used cars also offer lower financing rates, extended warranties, and comprehensive maintenance programs.

4. Insurance premiums cost less:

If a new car is involved in an accident, the insurance company will pay the current value of the car, leaving a price gap between the purchase price and the vehicle’s current value. This is where a gap insurance policy comes in. This type of insurance will cover the price gap between the new and the depreciated value, but it can significantly raise your premiums.

However, gap insurance will not be necessary when buying a used car, as the value of the vehicle has already been depreciated.

5. Registration fees cost less:

Annual registration fees are based on the vehicle’s value and year model. Generally, the first three years of a vehicle will have the highest rates, and then the rates are leveled off in the fifth year. This means that if you buy a three-year-old used car, you can easily save a few hundred dollars on annual registration fees.

6. Warranties:

Used cars can sometimes have extended warranties or a part of its original warranty. Extended warranties on a used car will provide factory repairs, spare parts, and faster services. Some used cars will even have the option to create a new warranty. You can also use the money that you saved from not buying a new car to have your car warranted until 100,000 miles.

7. Simple Modifications Can Improve Value And Performance

If you are particularly expert at making used cars look gorgeous, you should get great advantages by buying used cars and making few changes to its parts to make it perform like a new car. If you are buying a used Jeep, adding some quality jeep rims can make the car better and stronger. You can add off-road rims for longer-lasting performance. Changing the wheels, breaks, bumpers can give the car a great look.

Cons:

1. Hidden Issues:

Unless you’re buying a certified used car from a dealership, chances are that you’ll never know the car’s issues until it breaks down on you. Most pre-owned car sellers will never tell you the true history of the car. It may have been flooded, involved in accidents, or criminal cases.

2. Higher maintenance costs:

If you’re budget conscious, buying a used car can be a smart financial decision. However, the money you saved from that decision can quickly turn into maintenance and repair costs. Used cars will frequently need more maintenance and repair jobs in order to run properly. These may include tasks such as tire renewal, transmission flushing, and brake pad renewal.

3. Fewer choices and features:

If you’re not lucky enough, buying a particular car you want with modern features and technology can be hard. Generally, if you’re shopping for used cars, you can only get what you see. Used car buyers will not have the same customizable options or choices a new car buyer can have. If you’re into a specific set of features, then buying a used car may not be the best for you.

Closing thoughts:

If you’re still stuck between a new and a used car, you should first weigh out the pros and cons listed in this article. The smell of a new car is great, but is it really worth it? Take your time to do some research, and always look beyond the price before you make any buying decision.

Read Also:

I enjoy writing and I write quality guest posts on topics of my interest and passion. I have been doing this since my college days. My special interests are in health, fitness, food and following the latest trends in these areas. I am an editor at Content Rally.

View all posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Related

Fleet Maintenance And Route Planning

5 Cost Effective Ways To Improve Fleet Maintenance And Route Planning

Efficient fleet and route management present some of the most significant cost savings opportunities for transport operations looking to streamline expenses amidst rising overheads. While cutting too deeply risks performance impacts, simple modern technology tweaks can significantly optimize fleet maintenance protocols and delivery routing without demanding significant capital investments upfront. This article summarizes five budget-friendly tactics to boost fleet maintenance productivity and route planning accuracy using existing assets more strategically. Let's explore prime areas worthy of attention when aiming to balance the books without compromising quality. 1. Telematics Integration For Intelligent Maintenance   Onboard telematics tracking solutions generate immense data around vehicle usage - everything from daily mileage to fuel consumption rates, acceleration patterns, and engine fault alerts. GPS fleet monitoring systems generate data that is integral for transitioning to more intelligent maintenance planning. For example, tracking the total mileage elapsed on each vehicle provides maintenance teams advanced notice to schedule preventive services aligned to actual usage rather than guesswork. Engine fault alerts similarly assist workshops in stocking correct parts beforehand, reducing repair times. Such predictive, conditioned-based maintenance enabled by connected telemetry hugely increases workshop productivity and asset longevity over fixed service intervals alone. The marginal hardware costs pay themselves back rapidly by eliminating unnecessary jobs on under-utilized vehicles while significantly cutting downtimes for aged trucks requiring urgent repair. Managers also gain better oversight on accurate asset utilization - identifying overcapacity and right-sizing accordingly. 2. Dynamic Route Optimization Saves Fuel, Time   Route planning technology has evolved, allowing detailed mapping of traffic conditions, customer needs, and variable delivery volumes to generate optimized routes and sequenced schedules scientifically. Dynamic routing feeds ongoing location pings and logistical changes into algorithms pinpointing the most time and fuel-efficient plans moment-to-moment. For example, sudden traffic jams easily reroute deliveries, minimizing delays through detours or customer sequence swapping automatically. Live ETAs provide dispatchers with increased responsiveness to urgently insert priority, high-value stops. Route optimization similarly groups nearby customer drops, minimizing dead miles between stops. The aggregate savings from sharply reduced idling times, fuel spending, and completing more drops per shift quickly offsets monthly routing software subscriptions. A fluid platform also simplifies planning around volatile customer orders or urgent requests. Finally, the streamlined routing eases driver pressures and provides more predictable shift cycles, preventing overtime overruns. 3. Leverage Low-Cost Driver Behavior Analytics While extensive telemetry solutions assist maintenance practices and route optimization advice, essential low-cost tools encourage safe driving habits with significant safety and cost advantages.  Driver safety starts with journey behavior - sharp acceleration/braking, excessive speeding, and distraction cause most fleet accidents. Installing essential accelerometer apps on company phones, which riders keep in their pockets while driving, gives managers reliable indicators of driving standards without major privacy invasions.  The identified high-risk drivers become eligible for supplemental training to rectify gaps proactively rather than reactively post-accident. Even occasional coaching nudges promote defensive habits, directly preventing liability claims. Tax write-offs on essential safety apps provide further incentives against the staggering fallout of adverse driving.   4. Revise Periodic Inspection Regimes Most fleet vehicles undergo rigorous annual or bi-annual mechanical and safety inspections to renew registrations and compliance certificates. However, modern usage patterns indicate that minor intermittent inspections work better for heavier-usage vehicles. For example, an urban delivery van racking high mileage daily deserves more frequent - yet shorter - 30 or 60-day inspection intervals concentrating on high-wear items like tires, wipers, and fluids rather than entire annual drivetrain teardowns. This spreads CAPEX costs into smaller bites while catching deficiencies earlier before catastrophic failures materialize at the worst moment. For vehicles with lower utilization, quarterly checks remain suitable to balance effectiveness against outlay.  Managers shouldn't rely on annual checks to assure complete reliability on today's asset-intensive fleet demands—review inspection regimes to align with contemporary mobility profiles. 5. Embrace Eco-Driving Practices For Light Vehicles Too While most eco-driving programs target commercial trucks, light fleets equally deserve policy attention, given their ubiquity on roads. Minor optimizing tweaks around acceleration, idling, revs per minute, and running A/C make significant impacts multiplied over thousands of miles annually. Simply avoiding jackrabbit starts saves gas and brake wear dramatically. A/C idling policies similarly cut petty energy waste. Lower viscosity oils boost fuel economy while protecting modern engines from higher operating temperatures. Removing unnecessary cargo weight or drag-inducing racks after shifts conclude also assists in marginal performance gains. The eco-driving ethos crucially builds employee engagement around fuel budget guardianship. Business mileage reimbursements accordingly shift to reward MPG rather than total gallons consumed. Small in-cab reminders keep consciousness pervasive till smart habits become instilled in practice. Final Thoughts With transport margins tightening amidst inflation, energy volatility, and labor churns, sweating assets harder makes commercial sense if done responsibly. The above five pathways leverage connected fleet technology, data insights, and driver partnerships for optimizing critical maintenance and route planning protocols without demanding elaborate upfront investments. The collective small gains directly enhance workshop productivity, vehicle longevity, fuel economy, and driver experience while cutting risk and delays significantly. Beyond the operational enhancements lie vital cultural shifts, placing field teams at the heart of finding solutions rather than externally imposing changes. Collaborative problem-solving builds their engagement around responsible optimization critical for sustaining a continually improving business despite market uncertainties. Additional Reading:

READ MOREDetails
Carpool Service

How to Choose the Best and Most Reliable Carpool Service

Carpooling, also known as shared mobility, involves two or more users sharing transportation services. The idea has long been promoted in many countries, since it reduces both individual costs and road traffic, among other benefits. If you want to carpool, you should take your time to consider all the options available to you. Your type of shared mobility should suit your daily schedule and lifestyle. At the same time, since you are sharing a car with other people, you want to be sure that you feel comfortable. While there is no perfect carpool service, you can find the most convenient one out of all the alternatives. All you need is the right criteria to evaluate your choices. For instance, you can start with an Uber and Lyft comparison and see which of the two would be the best option. You can also compare them further with other available options. Here are some factors you can consider when choosing a reliable carpool service: 1. Punctuality : Carpooling is supposed to make life easier for you. So, when choosing a carpool service, you would want one that gets you to your destination on time. You would not want to find yourself running late for meetings just because you are saving money. 2. Efficiency : If you are carpooling with the aim of commuting from your home to your work location, you should always ensure that the destinations of your fellow carpoolers are not very much out of the way. This is how you could best avoid being in a car that makes unexpected stops or randomly changes routes. 3. Customer Reviews : Customer reviews are another great way to gauge the quality of services offered by the different carpool services. Most of the time, users share their honest opinions about the services that they have used. If you find too many complaints about a particular service, then you should probably avoid that one. 4. Responsibility : A carpool network that is almost always providing poor service can be very frustrating. Although sometimes mistakes are inevitable, you should only choose a service that is willing to absorb costs arising from their mistakes. Good customer service is a must. 5. Peer Recommendations : Asking people who have used carpool services for their opinion is a great way to find the best and most reliable service. If you can get a recommendation from a close acquaintance, then you will be almost certain that that opinion is an honest one. 6. Experience : Although different carpool services out there provide similar services, you can’t trust just about any service. You should choose a service that has sufficient experience providing carpooling services in your area. This way, you will not expose yourself to inconveniences from a new competitor. As new carpool services are established these days, ensure that you choose one that best suits your needs. Using the checklist above will help your elimination process and put you in a great position to find the best service out there. Read Also : Choosing The Right Anti-Theft Devices For Your Car In Houston TX

READ MOREDetails
Dangerous Intersections

Most Dangerous Intersections in Fort Lauderdale

Driving in Fort Lauderdale can be pretty intimidating and for good reason. Broward County is repeatedly found to be one of the most dangerous places to drive in the country, with a total of 41,755 accidents reported in 2016, which resulted in 245 deaths and 25,361 injuries. There are a lot of reasons that this could be the case, but the intersections of Fort Lauderdale might play at least some role in these numbers. Who hasn’t been uncomfortable sitting at a massive intersection, paying attention to the left turn, right turn, and straight green or red lights trying to figure out when it’s safe to go? Fort Lauderdale’s Zero Vision movement is an effort to reduce injuries and fatalities across the city for drivers, pedestrians, cyclists, and everyone else who shares these roads. Take a look at some of the most dangerous intersections, and tell us what intersections you think are worth mentioning in the comments below. A1A and Las Olas Blvd In 2015, this intersection had more than 1,000 accidents that caused injuries. That means that this doesn’t even include fender-benders where nobody was injured. Many accidents at this intersection are from one car rear-ending another, which can cause serious problems like whiplash. For personal injury firms like Friedland & Associates, this intersection is well-known due to the high number of injury cases that begin there. Sunrise Blvd and Andrew Avenue A lot of the accidents at this intersection comes from people either trying to race through yellow lights. When a driver decides to try to beat the light, they quickly realize how wide the intersection is, and may not be across completely before the other drivers begin to move through their now-green lights. For those who think that yellow means “speed up,” Florida’s intersections are a simple proof of why this is a bad idea. NE 26th Street and Federal Highway Depending on the side and direction of the street you are traveling on, this intersection has both 3- and 4-lane roads that either direct drivers to go straight, left, or right. This can often lead to confusion, especially for tourists who are unfamiliar with such large intersections or are just getting familiar with their rental vehicles as they cause an accident in one of the many lanes. Of course, we can’t pin all of the blame on tourists, so make sure you keep an eye out when you are coming through this intersection as well Not Just Concerning for Drivers Intersections can cause serious problems for drivers, but they can cause serious problems for pedestrians and cyclists as well. When traveling on foot, some intersections require pedestrians to cross eight full lanes of traffic before they are safe to the other side, which is just one reason that Broward County is so dangerous for pedestrians. Florida has the highest rate of pedestrian deaths in the country. In addition to foot traffic, cyclists must navigate these roads while sharing lanes with drivers who are either inexperienced with interacting with cyclists, or simply not expecting them on such busy streets. Read Also: Windscreen Replacements Are You Thinking About Buying Quad Bike For Your Kid? Honda Cars In Watertown NY: 8 Things To Check Before Buying A Second Hand Car

READ MOREDetails