Selling Collectibles: A Guide to Selling Your Memorabilia at Auctions

Published on: 11 March 2019 Last Updated on: 15 July 2024
selling collectibles

The market for collectibles can be difficult to navigate. When you do master it, though, it can pay out to massive potential gains.

How can you master the collectibles auction market?

It is one of the most detail oriented and fickle marketplaces in the world.

Don’t worry, we have a quick and simple guide to help you start selling collectibles!

Selling Collectibles:

Whether you have old toys in the attic or inherited a flintlock for sale, there are many of us who have collectibles that could be worth more than they might seem.

Understanding Your Item’s Value:

Any collectible can have a large variety of details that give it value. Some of these may not apply to all collectibles. Consider them all when figuring your item’s value.

1. Rarity and Age:

Rarity and age are two massive defining factors for value.

The older an item is, the higher the interest in it can be. Even a very common item can be valuable if it is over a hundred or more years old. The age makes it less likely that an item still exists at all, as many as lost to time.

Rarity is an even bigger factor. The more common an item is, the more flooded the market may be, no matter the age. A rare item will always have some sort of value due to a lack of duplicates in the market.

2. Condition:

A simple detail to check. Is the item in question intact? If it is in dire need of repairs, that is going to hurt the value, as you will need to spend money to repair it or decrease the cost at auction.

Hiring a restoration expert can be worthwhile for the rare items, but outside of a very high-value item, it may not be worth it for sale.

3. Manufacturer Details:

Going hand-in-hand with rarity is the manufacturer. Who made this, and where, can be a big factor in value.

A big manufacturer that produced a similar product for decades decreases the value. A famous, single artisan is the dream for a collectible seller. It makes it both rare, but also well known and well regarded.

4. Wow, Factor:

One last detail is how exciting the item can be. A simple utensil or everyday product may have some value, but a unique and bizarre item has the chance of selling for an incredible amount.

The problem becomes when an item is too unique or bizarre. If no one understands the point of purpose for it, the item can go too far into the junk category. It can be a fine balance.

The Details of an Auction:

Auctions can be difficult to navigate. Once you have your item and an idea on its value, you will need to find a buyer.

An auction can smooth out the entire process. They will sell and even advertise your collectible so you don’t have to. This all comes at a price, of course.

1. Commission:

Most auction sites have a commission fee. This is their take of the profits when the item sell. A commission fee can go as high as 20%, or as low as nothing if you have a big enough collection that can draw in other customers.

2. Other Fees:

Some auctions have a few other fees to consider. Authentication fees are common, to ensure that the items you are selling are legitimate. These can get pricey, depending on the volume of collectibles.

There may also be a premium buyer’s charge, to ensure that an auction may cover costs.

After the Auction:

These are the basics of dealing with auctions and selling collectibles. It is a market filled with exceptions and details.

While you are out finding the right auction for your collectibles, you can spend some more time learning about all sorts of things at Content Rally. Contact us today to learn more!

Read Also:

Content Rally wrapped around an online publication where you can publish your own intellectuals. It is a publishing platform designed to make great stories by content creators. This is your era, your place to be online. So come forward share your views, thoughts and ideas via Content Rally.

View all posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Related

making business purchases

Top tips for making business purchases

When it comes to running your own business, it is vital to do all that you can to succeed. With 20% of small businesses failing in their first year, it is clear just how key it is to pay attention to all aspects of your operation. Doing this will make sure that you are one of the US businesses that not only make it past this first 12 months but also thrive. Of course, there are lots of ways to do this, and you should look into them all as a responsible business owner. One key area to focus on is your business finances and doing all that you can to keep them in good order. Most businesses will have to spend money on making purchases at some point, and this is something that you should think about carefully. How to make awesome business purchases : By paying attention to the money that you spend on business purchases and how it is spent, you will give your business a great foundation to build on. Here are some fabulous ways to make the best business buys: Only buy what you need – for many businesses, the temptation to spend more than they need to is ever present. This could mean that you spend too much on buying items for your business, which eats into your bottom line. Before you buy anything for your business, it is important to make sure that you really need it and that it will add value to what you offer. Shop around for the best deals – you should always shop around to get the very best deals. All the little savings that you make over the year from doing this will soon add up to big savings come year end. Use reputable suppliers – it is essential when making business purchases that you only use top-class and reputable suppliers. The equipment that you buy will have a direct impact on your organization, so it needs to work as intended. Go green – within business now, the real hot topic is meeting your environmental responsibilities. This is something to bear in mind when making the business purchase so that you only shop with suppliers who care about this. By doing this, you will be using products that are kinder to the environment and you will be a greener business. What about purchasing with overseas suppliers?  Of course, you may need to deal with overseas suppliers when purchasing goods for your business. When doing this, remember to be extra careful about checking their credentials and only using a reputable company. In addition, you will need to think about how to make the payment if they use a different currency in their country. Online money transfer companies are a very easy and secure way to make this type of payment as a business. Make business purchases the smart way :  Buying goods or equipment for your company is a critical task in any business. By taking steps to do it right and only spend what is necessary, you will be protecting your cash flow and capital. This will stand you in good stead as you grow and move into the future. Read Also : 6 Things You Should Know Before Starting A Business Tips On Selecting A Storage Solution For Your Growing Business How To Choose Best VOIP For Small Business

READ MOREDetails
Furniture

Detention Centers: How To Choose The Right Furniture For Inmates

Corrections facilities cannot be too careful when it comes to choosing furnishings. Inmates can take a simple, everyday object and use it to do harm to themselves, others, or the facility. When choosing furnishings, a purchasing team must consider several factors. Safety must always be the top concern when a person or entity goes to buy detention center furniture. The team must also take into account the durability of the furnishings. However. comfort should also be a consideration. Checkout Prime Ways To Choose The Right Furniture For Inmates The following tips will be of benefit when the time comes to make this investment in a facility. 1. Tamper-Proof Pieces Correctional facilities need to have tamper-proof furnishings for several important reasons. These furnishings help maintain safety and order within the facility. If furnishings like beds, desks, or fixtures can be disassembled into potential weapons or contraband, it puts both inmates and staff at risk. Tamper-proof designs make it much harder for inmates to fashion shanks, shivs, or other dangerous items. Tamper-proof furnishings reduce property damage within facilities. Inmates may try to vandalize or destroy furnishings out of boredom, frustration, or protest. Having sturdy, reinforced items makes this much harder to accomplish. These furnishings save on costs over time. If furnishings frequently need to be repaired or replaced due to tampering or destruction, it creates unnecessary expenses for the correctional system. Investing in quality, tamper-proof items upfront saves money in the long run. 2. Furnishings That Are Easy to Clean Correctional facilities house large populations of inmates in close quarters, which can facilitate the spread of germs and disease, as the world has learned during the global pandemic. The constant movement of people in and out of the facilities also increases exposure to outside germs. Therefore, cleanliness and sanitation are crucial in these environments. All furnishings and surfaces need to be cleaned frequently and thoroughly to control infections. Upholstered furniture, rugs, and other porous materials trap germs and bodily fluids that are difficult to sanitize. These should be avoided. Instead, correctional facilities should opt for furnishings made of non-porous materials like metal, plastic, and vinyl that can be wiped down and disinfected regularly. Seamless, one-piece construction is preferable over joints and crevices where bacteria can lurk. Furnishings and fixtures should also be scratch and tamper-resistant. The easier items are to clean and maintain, the higher the standard of hygiene that can be upheld in correctional facilities to protect inmates, staff, and visitors from illness. Related: 5 Different Kinds Of Wood Used To Make Furniture 3. Ligature-Resistant Designs The rate of suicide in jails and prisons is alarmingly high. It remains the leading cause of death in these facilities. A major contributing factor is the availability of anchor points that can be used for hanging. Things like exposed pipes, vents, door hinges, and handles can all provide an opportunity for self-harm if an inmate is experiencing a mental health crisis. This underscores the critical need for ligature-resistant designs in correctional facilities. Specifically, the physical layout and infrastructure should aim to eliminate anchor points and anything that could be fashioned into a noose. This includes swapping out fixtures, covers, and hardware for specially designed suicide-resistant models. Cells should be constructed in a way that reduces ligature points. Tear-resistant bedding and clothing could also mitigate risk. Taking these kinds of proactive measures through environmental design can go a long way in preventing suicides and saving lives behind bars. With the right ligature-resistant adaptations, correctional facilities can be safer for inmates struggling with mental illness. These are just a few tips for choosing corrections furniture, but as every facility has unique needs, there may be other factors to consider. However, the above-mentioned tips apply to all facilities. Keep them in mind when choosing the right furnishings for a correctional facility to save time and money while safeguarding inmates and employees alike. Read Also: Outdoor Furniture: Design Trends And Tips For Creating A Relaxing Outdoor Oasis Home Improvement Hacks to Add to Your Space Furniture that Defines Comfort

READ MOREDetails
Intrapreneur

Who Is An Intrapreneur? Definition, Characteristics, Pros/Cons, More

Intrapreneurs and Entrepreneurs - they sound similar right? Yeah, they do, but their definition, meaning, and characteristics are totally different from one another. Here is what we know about entrepreneurship. Read the guide till the end to grab some rich insights. Who Is An Intrapreneur? Here is a concise definition. An intrapreneur is the one who is responsible for developing an innovative project or idea within an organization. He/she doesn’t face the outsized risks that an entrepreneur doesn’t. However, he possesses the major access to all the capabilities and resources of an established company. To be very specific, the intrapreneur gets the autonomy to work on projects having a considerable impact on organizational development. The term intrapreneur is an amalgamation of two words like “internal” and “entrepreneur.” In 1978, it was first coined by Elizabeth S. Pinchot and Gifford Pinchot II in a white paper. How Does Intrapreneurship Work? You are now well aware of what is an intrapreneur. They are the employees of an organization who are given the responsibilities of working on special ideas and projects. In addition, they are given the freedom and time to develop and grow the project that an entrepreneur would. Does this sound like they work solo? Well, not really because intrapreneurs have all the capabilities and resources of the firm at their disposal. Additionally, they have different objectives. While an entrepreneur envisions the creation of a company from level 0, the intrapreneur has a broader vision for an established entity. The visions mainly involve radical changes to company processes, products, or traditions. He applies his skills and experiences directly to implement them on the job. What Are The Characteristics Of A Good Intrapreneur I hope, by now the meaning is pretty clear to you? Now, Intrapreneurship has some roles and responsibilities which require some special characteristics. Below, I have listed some of the characteristics an efficient intrapreneur must possess. 1.They Are Passionate About Problem Solving Angels and Intrapreneurs will agree on this one. Focused intrapreneurs are the ones who are passionate about solving problems and set forth to resolve business-oriented issues. 2.They Are Curious, And Adaptable Enough When it’s the start of a business, the intrapreneur has to play roles in several sectors such as product management, engineering, and marketing. Hence, angels look for people who are curious, adaptable, and respond to learning and development. 3. They Are Transparent As an intrapreneur, the fastest and most efficient way to gain the confidence of your sponsors is by showing transparency. If any unwanted circumstance happens, then also, transparency needs to be maintained. 4. They Are Resilient Intrapreneurs starting a business simply have an idea which they have to work super hard to give a shape. That’s why they need to be highly resilient since it’s likely they would come across a plethora of obstacles throughout their journey. Pros And Cons Of Intrapreneurship Here is a critical analysis of Intrapreneurship I have explained through an evaluation of its pros and cons. Take a look at the table below: Pros Of IntrapreneurshipCons of IntrapreneurshipIt decreases the financial risk on the innovatorThe glory you enjoy is not for you only, it’s shared.Makes use of all the organizational talent and resourcesThere is high potential for conflicts with the other members.Increases the delivery of better services, products, or support.Returns are generally less in comparison to the entrepreneurs.Enlarges your reputation and develops your network.There are a myriad of risks pertaining to failureIt’s a stepping stone to entrepreneurshipYou will still have a boss monitoring you Companies Around The World Having Intrapreneurs Here are some leading tech giants around the world who support Intrapreneurship just like different types of entrepreneurs: GoogleMicrosoftShutterstockIntelFacebookAppleGeneral MotorsVirgin  Frequently Asked Questions (FAQs): Q1. What Does Intrapreneur Mean? An Intrapreneur is an employee who is given the support and authority to create a new service or product. Unlike entrepreneurs, they have no concern about whether or not the product would become a revenue source for the company. Q2. What Is Intrapreneur Example? One of the greatest examples of Intrapreneurship is Dreamworks Animation. It’s a media behemoth that gave classic works like Madagascar and Kung Fu Panda. They also offer classes on script writing to the animators. Q3. What Are The Types Of Intrapreneurs? The 3 types of Intrapreneur are as follows:1. Advocate, coming from a customer-facing role 2. The creator coming from an internal-facing role3. The change maker coming from an external-business-facing role.  Q4. What Is The Difference Between Intrapreneurs And Entrepreneurs? The main difference between Intrapreneur and Entrepreneur is that an entrepreneur is a ground-up-and-go person when it comes to their own money. On the other hand, an intrapreneur is someone who starts steaming from inside a large company. That’s all about Entrepreneur Vs Intrapreneur. The Bottom Line That’s all we had to say about Intrapreneurs. They are overlooked often in the realm of entrepreneurship. However, with the world-changing innovation coming up, established corporations are prioritizing them. Wanna learn how to become an intrapreneur and Intrapreneur Vs Entrepreneur in more detail? Then keep an eye out on our website as we will be coming up with a guide to that. Read More: What is an Airsoft Gun?How Gun and Security Gear Advanced through the YearsParts of a Gun: All You Need to Know About the Components of Your Firearm

READ MOREDetails