Layman’s Guide for Improving Your Phone’s Signal Strength

by

21 February 2018

Technology

mobile phone

Most people do not have any idea on how to get better service for their phones aside from walking around and stumbling upon a signal. For most people, that’s enough.

However, there are better, more efficient, and less frustrating ways of getting good phone reception.

And the good thing is, most people can do them without being an expert on phones. It’s just a matter of knowing the right stuff about phone signals.

You can improve your phone’s signal too. Follow this simple guide and you’ll never have to worry about dropped calls again.

Trace a Signal Using Your Phone :

Like mentioned above, the usual solution that people do is walk around and hope to find a signal. But that can take a lot of time.

Thankfully, most phones have a hidden setting to turn on their decibel meter.

Cell signals are measured in decibels (dB) and work within -50 dB to -120 dB. The signal is strongest the closer one gets to -50 dB and weakest in -120 dB.

By turning on your phone’s dB display, you can efficiently trace a signal. You can track it down to where it is strongest.

You can check your dB meter through these steps:

iPhone :

  1. Activate Phone Mode
  2. Dial *3001#12345#*
  3. Enter Field Test Mode
  4. Check the notifications bar to see the dB reading

*Note: This method won’t work on an iOS 11 phone and models that use Intel modems.

Android :

  1. Access Settings
  2. Go to General
  3. Select About Phone
  4. Then click Network or Status to show the dB value

Go Out in the Open :

There are many things that can interfere with cell signals.

Concrete walls and floors, metallic materials, the curvature of the Earth, other electronic devices, and even bad weather can disrupt signals.

As such, getting away from all of these deterrents can help you get good reception. Cell signals are strong in open fields. Find an area without any obstacles between you and a cell tower to get the best reception.

But first, you will need to know where the nearest cell tower is, so you may want to check your carrier’s map, use a tower finder app, or refer to an online cell tower map.

Once you have an idea where the cell towers in your area are, you can start looking for a place with a direct line of sight to a tower or, at least, somewhere with a relatively unobstructed path to it.

Getting a Signal Booster :

A permanent solution to improving one’s phone reception, especially at home, is by getting a signal booster.

A signal booster grabs the signal from the air, doubles its strength, then redistributes it around itself, effectively making another signal source. It’s ideal for homes and workplaces that regularly can’t get a decent reception.

Also, signal boosters should be placed somewhere in the center of the building so that it can cover the maximum area that it can.

Some boosters also improve other signal types, like the WeBoost Connect 4G, which affects 4G signals, as well as 3G and voice networks from all carriers.

Conclusion :

Getting the assistance of an expert isn’t necessary when one knows the essentials of improving your phone signal.

Don’t suffer from bad reception ever again. Try any of these methods and keep your lines open.

Read More :

1. Best iPhone Spy Apps Without Jail Breaking

2. How Smartphone Tracking Programs Assist Parents In Controlling Their Children

3. 5 Blogging Tips For Beauty And Fashion Bloggers In 2018

 

I enjoy writing and I write quality guest posts on topics of my interest and passion. I have been doing this since my college days. My special interests are in health, fitness, food and following the latest trends in these areas. I am an editor at Content Rally.

View all posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Related

Edit A PDF File

How To Edit A PDF File Online: A Step-By-Step Guide

If you regularly send, receive, and share PDF files with people and on digital platforms, this article will make your life a lot easier. Simply edit a pdf file and use it for your next assignments. While most people use PDF formatted files, they do not know how they work or how you can make edits. Instead, they simply use the PDF format to share valuable information. But, the truth is that the use of PDF goes far beyond that. PDF has now become an integral part of the content-sharing community. No matter where and what type of content you are sharing with others, PDF format offers the ease to access the information and document anywhere and anytime. Is PDF A Ultimate Content Solution? One of the most popular uses of PDF today is the use of marketing. Most businesses have made PDFs a part of their marketing campaign, where they share PDFs with their prospective clients and customers to make them understand their businesses and services. In fact, businesses have also found the use of PDFs to drive traffic to their website. All in all, you can say that PDF is not just a file-sharing tool. But sometimes users feel a little bit disappointed because PDF editing tools are very available.  Once any user knows how to edit a pdf file, the document access will become more versatile. While it is the most versatile tool to access documents, people still find it difficult to make any edits and changes.  Although the process of making edits and changes is quite easy, people simply don’t know the right practices. Seeing how people still find it difficult to use PDF to its full potential, we have come up with an article. Here we will share different ways to edit your PDF Online. What Is A PDF File? PDF is a file format that was also developed by Adobe. PDF is an abbreviation for a Portable Document Format File. PDF files are the perfect way to share any information and valuable document with others. The reason why the PDF file format is popular all around the world is that it is also going to support the edit a pdf file features.  eBooks.Products manual.Images. Interactive CTA buttons.Video.Embedded fonts.Hyperlinks and much more. Because PDFs don't rely on the software that created them, no matter which device you use to access PDF files, it will look the same. However, before you open them, you need software like PDF Candy to open them. How To Open A PDF File? When it comes to opening a PDF formatted file, most people head right back to Adobe Acrobat Reader. Of course, there is nothing wrong with using Adobe Acrobat to open the PDF file. But, it's not the only software that allows you to open it. The PDF file format is a program that is created by Adobe and can use almost any third-party software tool to open and edit a pdf file. Most web browsers like Google Chrome and Firefox can open PDFs on their own. So you may not need any extension to open PDF files. While there are many software tools that help you open PDF files, we highly recommend using PDF Candy. It is the perfect software tool if you are after something more than just the basic features. How To Edit A PDF File Online? Editing is an important part of creating and editing a pdf file. Because of how easy it is to edit your PDF files, PDF format is popular. While offline PDF editor software tools are there to help you with editing, it becomes challenging when you are not working on your computer. This is when you can take help from an online PDF editor. Whether you want to remove pages from PDF online or want to add images, online PDF editors work the same as offline PDF readers. Sep 1: Upload Your Document To use the online PDF editor, you need to upload the document of your choice. There are three ways in which you can upload the documents. ● There is an Upload Documents tab that helps you fetch the desired PDF from the system. Choose the PDF file, and it will open the file on the system. ● If the PDF file is not in the system, you simply paste the link of the file and the File Now button. This will help you create a file of the content on the link and edit a pdf file. ● Finally, you can use the Search For Document option to enter the document name and search it in the database. After the upload is completed, you will be immediately redirected to the editor. Step 2: Add Text To A PDF Text is the most basic instrument for making any edits or changes. So, let's start with this. On the online editor, you will be able to see the ‘Add Text’ button. Click the button. This will allow you to use a rectangular box hovering over the document. You can navigate through the PDF pages and place the box where you want to add texts. Even after you have written the text, you want to change the placement of the text. You simply need to change the location of the rectangular box and start to edit a pdf file. Step 3: Add Image To PDFs You can even add images using an online PDF editor. To make your PDF document even more concise, you can use the add image feature. To add an image, follow the steps for image edit a pdf file. ●   Find the toolbar and click on the inserted item. ●   There, you will be given the option of using database images or images from the system. If you want to use different images, you can simply upload the images. ●   Once the image is added, insert the image where you want. While you are using an online editor, you can actually play with the image dimensions. That means you can change the size of the images based on your needs. This feature helps you make your PDF more presentable. After The Edit Is Complete After all the editing is completed, ensure that no errors are on the files. After ensuring that no further edit is needed, click on the ‘Done’ button. The system will prompt you to choose a saving option. Choose your desired saving option, and your document will be saved accordingly and edit a pdf file. Additionals: How Should A Newbie Get Along With a PDF To JPG ConverterHere’s What You Must Look For In A Reliable PDF To JPG Converter

READ MOREDetails
Heat Pump Installation Mistakes

6 Unforgivable Heat Pump Installation Mistakes Everyone Should Avoid

Have you thought of acquiring a new heat pump? A heat pump enhances the energy production in your house. And, just the same way you take your time researching for the best model, Is how you need to go about as you look for the right technician. When you invest in a new heat pump, ensure you are more cautious while hiring an installer. If the installation is not done appropriately, the equipment may fail to function as expected. Reaching out to a professional installer is vital as you will be able to save extra cash on the expensive repairs. You can get high-quality air conditioning installation by checking out https://americanhomewater.com/ac-installation/.  What are the must-know heat pump installation mistakes everyone should avoid? 1. Using Incorrect Furnace Size: Size is supposed to be of great importance in regards to an HVAC system with a heat pump not being an exception. Selecting a pump that's of the wrong size can lead to unwanted outcomes in your house. What can happen if it is very small or very big? For a smaller one, it will not switch on and off most of the time though you can still use it for some time to acquire the room temperatures you want. You can do this to enable it to deplete the extra energy. And when it's very large it will go through fast and short cycles. This will in turn exert more pressure towards the blower motor. Therefore having the wrong size of a heat pump will cause insufficient cooling or heating of your residence. This will in turn lead to irritating levels of humidity and unequal temperatures in the house. The pump can also get damaged unexpectedly apart from the rising electricity bills. When the blower motor breaks down, this leads to a ripple- effect which also impacts the remaining inner parts of the pump. There is a need for periodic repairs until it's time to do a complete replacement of the heat pump. ●  How Can You Get The Right Size? You can acquire the right size if you work with a highly regarded technician dealing with heating and air conditioner repairs. The contractor will inspect your house and the system and then recommend the most ideal unit to replace it with. You’ll also get advice on the amount of conditioned air every room requires for heating and cooling. Before you get one, take note of the devices generating heat in your home, household members, and their preferred temperatures. Furthermore check your home's insulation, windows, residential square footage, and the local climate. You can opt for the pump ratings of its energy efficiency. 2. Malfunctioning Duct Installation Process: Did you know there are instances when the contractors have it rough while putting in place new ductwork? Some go to an extent of employing poor workmanship to undertake the role. They also utilize cheaper tools. Setting up the ducts incorrectly will leave gaps and cracks. At some point, there may be the use of a weak sealer like the tape rather than a long-lasting one. And in this instance, get ready to have an experience of the leaking ducts more sooner than you thought. For sure, this will raise the energy bills since the heated and cooled air gets cluttered. There are also issues related to humidity, more dust, and disturbing noise. 3. Opting For a Firm Without  NATE Certified Technicians: Who can even think of contacting the wrong technician? Come to think of it, why should you choose an installer with the lowest proposal without getting more information about the certifications or a service provider? Before settling on one, confirm if they are NATE or MCSA certified, hence you will get quality services related to the installation process. Also consider examining whether the installer is experienced, currently training, or even ask for a reference for an equivalent job as the one you are offering. 4. Thermostat Installation In The Unwanted Spot: The area you position the thermostat is very important and it will influence how your HVAC will be operating. The most well-known fault of the installation of an air conditioner is placing the device in the wrong locale. This is why most of the conditioners do run extra hard as opposed to how they need to be functioning. Consider understanding where the thermostat will be properly placed. You can opt for a place where the sun shines less often or farther from the air vents. If you control its temperature a lot it will be more correct and the AC will function without any glitches. 5. Unsuitable Refrigerant Charge: Erroneous heat pump installation can lead to some refrigerant-based problems. And in case a unit is short of a refrigerant then it implies the technician did not add sufficient amounts in it. The leaks next to the seals may also be more noticeable. Especially on the sections, the refrigerant lines attach to the other elements.  This is also due to wrong installation procedures. These circumstances show the heat pump is situated where there are bunches of tension, where the compressor is. This can cause a substantial rise in the cost of electricity. The low levels of the refrigerant can also deter the evaporator coil from heat absorption and therefore promote the freezing of moisture. The issue can be well dealt with by enabling the ice to melt or rubbing ice off. You need to contact your contractor to inspect the heat pump in case of any leaks and put in the additional refrigerants. 6. Devising a Poor drainage System: When the AC is running, there can be quite a considerable amount of moisture. In case this is not filtered the right way, it can affect the staff closer to it. There can be musty smells, mold growth, backed-up tubes, and damaged drywalls among others. Putting up bad drainage is often known to be among the major AC mistakes and some houses are experiencing these kinds of problems. In case of any queries regarding the drainage, always talk to a professional. This will help you confirm if all the things are well placed in response to the predictable subsequent years. Read Also: How To Save Money On Your Air Conditioning Costs This Summer AC Repair Austin: Tips on How to Choose an AC Unit Don’t Get Caught in a Heatwave: 5 Signs That Your AC Is About to Go Out

READ MOREDetails
Internet Speed Tests

5 Easy Ways of Improving Internet Access with Speed Tests

Speed tests are a very handy tool to have around. Most people just use them sporadically when experiencing internet issues. At most, they want to check what speeds they’re getting with their internet plans. Speed tests, as the name suggests, give you information on the upload and download speeds you’re getting with your internet connection. But did you know you can actually use that information to improve your internet access? This blog explores five ways you can use speed tests for a better internet experience. Improving Internet Access with Speed Tests Speed tests usually test the upload and download speeds as well as the ping on your internet connections. These days, when everyone is connected to the internet, almost every household experiences internet issues of some sort. People use speed tests at times like these to check their broadband, Wi-Fi and cellular speeds. But there’s actually a lot more than you can do with an accurate speed testing application like Ookla. Here are 5 easy ways you can use a speed test to improve your internet experience: Find the Fastest Internet Service, Provider Identify and Fix Dead Spots Around the House Confirming You Are Getting the Advertised Speeds Finding Places with the Best Internet Service Isolating Problems with Your Router or ISP Below follows more on these simple uses for a speed test you probably never thought of. Find the Fastest Internet Service, Provider Speed check is a great way to find the fastest internet service provider in your area. You will need the help of a few friends and family members with different service providers in your area. Get each person to run an Ookla speed test. Everyone should run the test on their internet connections at exactly the same time. Ask everyone to make sure their Wi-Fi is switched off when they run the tests. Share the test results with each other and compare them to figure out the fastest ISP in your area. After that, it is a simple matter of switching from your current provider to the fastest one. Identify and Fix Dead Spots Around the House A dead spot is a spot inside your home where Wi-Fi signals are patchy at best or dead at worst. Dead spots can be really annoying when you try to use the internet near them. Streaming, gaming, even working may face disruptions in Wi-Fi dead spots. Luckily, speed tests can help you identify and fix dead spots inside your home. Run a speed test in the areas you experience patchy network signals. This will tell you if you’re working in a dead spot or if your router is placed in one. Often enough, moving the router can fix most dead spots. However, if that is not a possibility, then look into Google WiFi or similar mesh systems for a better signal around the house. Confirming You Are Getting the Advertised Speeds Speed tests are a great way to test your internet connection to check if you are getting the speeds you paid for. Simply use an Ethernet cable to connect your computer directly to the router. Then run a speed test and see what speeds you get with a wired connection. Most internet service providers advertise speeds based on a wired connection to the gateway. This means the speeds you get over Wi-Fi may vary. But if you’re getting slower speeds on a wired connection, you should get in touch with your ISP right away. Use the speed test results as proof of not getting the speeds you are paying for. Finding Places with the Best Internet Service Let’s say you decide to work from home one day but your service is on the fritz. So you go to the nearest coffee shop only to find the Wi-Fi there isn’t working well either. Nightmare situation, isn’t it? You can’t miss your deadlines, so what should you do? Use speed tests at different places with free internet. This will help you locate a place that has the best internet service. Of course, public Wi-Fi speeds also vary according to the time of day. During crowded times like weekends, holidays or even lunch hours, there are more people connected to the same network. The more people use the same network, the more bandwidth splits and the slower the connection gets for everyone. Isolating Problems with Your Router or ISP When there’s a slow Wi-Fi connection, the problem could be with your ISP or with your router. 2 Speed tests can help you identify where the problem lies. For the first one, connect your computer directly to your router via Ethernet and run a speed test. Then disconnect your computer from the cable and run another test while connected to Wi-Fi. Bear in mind that Wi-Fi will always be slower than a wired connection. But if the difference in speeds is significant, you may need a new router. Most providers offer their own equipment. So it's better to call customer service, if your router is outdated or not working. Hopefully, this blog will have helped you with useful information to improve your internet experience at home. Let us know if you found this blog helpful. Read Also:  Unlimited High-Speed Internet Plans Of Charter Spectrum In The USA Quick Ways To Instantly Speed Up Your Home PC Network

READ MOREDetails