The Most Common Causes of Truck Accidents

Published on: 05 February 2020 Last Updated on: 11 October 2021
Truck Accidents

Big rigs, delivery, trucks or any kind of commercial trucks can present some serious threats to other vehicles and passengers present on the road. As per statistics, around five hundred thousand accidents from the total accidents are caused either directly or indirectly by commercial trucks. Out of these five hundred thousand, around five thousand have reported leading to deaths due to truck accidents.

In order to take efficient measures for the prevention of truck accidents, we first need to understand the main causes as well. In this article, we have listed some of the most common causes of truck accidents.

The Most Common Causes of Truck Accidents:

1.Cars Driving in the No-Zones areas

The area behind and beside a truck is known as the ‘No-Zone’ area. A passenger vehicle or car driving in this area automatically puts itself in a dangerous position because the area is not visible by the driver. An accident can occur due to zero visibility.

2. Not Training the Truck Drivers Properly

Driving a truck is entirely different from driving a car and requires an enhanced level of training. Drivers who are not properly trained may not be aware of the safety concerns and important techniques for driving trucks. These drivers, in turn, are more prone to cause accidents later on as well.

3. Speeding and Over Taking by the Truck Driver

Speeding by any kind of vehicle whether it is a truck or a passenger car or even a motorcycle can ultimately lead to an accident. Overtaking while driving especially at high speeds also contributes to a majority of accidents.

Most of the truck drivers tend to over-speed as a result of the unrealistic deadlines given by their companies to deliver goods in a lot of cases. Over-speeding, especially in poor weather conditions, poses a heightened level of danger for all the vehicles present on the road.

4. Poorly Maintained Trucks or Trucks with Faulty Systems

A truck or any kind of vehicle needs to be properly maintained so that it can function well on the road. If a commercial truck is poorly maintained or consists of faulty systems, then it can lead to critical accidents. Faulty brakes, for example, can lead to an accident if a truck driver is not able to stop the truck at point hence leading to a collision.

5. Distracted Driving and Fatigue

Drivers tend to become exhausted and even bored when they have been driving trucks from a long consistent period of time. As a result, they might be prone to falling asleep on the wheel or may look for distractions to keep them entertained. These distractions can include playing games on their cell phone or speaking on the cell phone while not focusing on the road.

Speak to a Truck Accident Lawyer Today!

These were some of the common causes in brief. In order to learn more in detail for filing a truck accident claim, you can choose to contact the Truck Accident Attorney Chicago for better understanding.

Read Also:

Content Rally wrapped around an online publication where you can publish your own intellectuals. It is a publishing platform designed to make great stories by content creators. This is your era, your place to be online. So come forward share your views, thoughts and ideas via Content Rally.

View all posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Related

Car Rims

What Do You Need To Change Car Rims?

If you’re a regular car user, changing your car rims is something that you might only do if they either get scratched by a pavement, or they get completely worn out.  For car enthusiasts though, this is a completely different story. Car lovers are known to tweak certain things about their cars just to make things look, sound or even feel better. Most of them do it as a hobby and are even prepared to spend top dollar in their quest to alter or improve the condition of their cars. If you think that this is a hobby that you could easily take to, then one of the parts of your car that could be easier, to begin with, is your car rims. For those that are completely clueless about cars, a rim is the cylindrical outer edge of a wheel that supports and holds the tire to it. They are definitely among the most noticeable parts of a car. For any true car enthusiast, having a set of rims that complement the car’s aesthetic appeal is very important. You might choose to have them off-the-shelf or get customized diamond-cut alloys. In fact, you can opt to design and personalize your own from scratch thanks to modern-day technology. Wheels vary in size and style, and this can adversely affect the type of car rims. Bigger wheels are considered sportier and are ranked higher, but they also come with their fair share of cons. Be ready to experience a change in fuel consumption, steering performance, speedometer reading, and quick tire wear if this is what you’d like to go for. A good rim is one that fits well in the tire. As it rotates around the tire nods, the contact that occurs produces friction that helps the wheel turn. You don’t want to have a set that interferes with your wheel turns, so it is advisable to seek help from a rim professional before purchasing any set. This will ensure that you get the most worthy set for your car. When it comes to types of rims, the steel rims are more affordable and are usually covered by a hubcap to make them more appealing. They are also heavier than other rim materials. The aluminum rims are stylish and durable, while the carbon-fibered ones are newer, durable and light-weighted. This helps a lot in the conservation of fuel. Simple steps to guide you when replacing your car rims: Installing new rims isn’t hard, but it requires careful execution and the right set of tools to make sure it’s done correctly. Be sure to follow these simple steps to guide you when replacing your car rims at home. 1. Select and buy New Rims The whole rim replacement process begins by purchasing a new set. You can do this by visiting various local auto parts dealers in your area. You can also opt to check online from a well-known shop that offers stylish yet durable rims. You’ll also have to give a bit of thought into the color. Red rims tend to provide a more personalized look while chrome rims give your car a nice and noticeable shine. Black rims tend to be more popular within the younger generation as it gives the vehicle a darker curbside appeal. Don’t forget to check the weight of the rim as this affects your vehicle’s overall performance. Also, be sure to match your new rims to your current tires. The diameters of the new and old set should be equal. You’ll also need to check whether the bolt patterns and bore circle diameter are similar in order to perfectly fit. Collision might occur if the rims aren’t fitting. 2. Make sure the Vehicle is Stable. Ensure you have a flat and level spot to park. For automatic cars, be sure that the car is in the park and the emergency brake is secured. We don’t want the car to accidentally roll forward or backward. Instances where the vehicle rolls are very common. This is especially when you end up rushing the process without paying much attention. This often happens to people who are removing a wheel for the very first time. You can use a piece of wood, a rock, brick or any other firm item that is a few inches high to support the wheel. 3. Lift the car and Remove the Wheel You’ll need to start off by removing the hubcap using a screwdriver. Similar to changing a tire, look for notches or grooves under the car where you can safely place the car jack. Take the car jack and use it to slowly raise the wheel until a bit of the weight has been taken off the wheel. Slightly raising prevents the whole wheel from turning as you loosen up the nuts. Apply force while removing the lug nuts as they’re usually tightened up pretty good. Before you loosen the nuts all the way, pump the jack and completely lift the wheel off the ground, but do not overly suspend it in the air. Then, use a socket wrench to turn the nuts counterclockwise. Make sure not to lose the bolts as they will be used with the new rims. Remove the wheel and lay it flat on the ground. 4. Remove the Old Rim Let the air out of the tire because it’s harder to remove the rim with all of it still in there as it will require more effort and take more time. Insert a tire lever on various points of the wheel; be careful not to damage the tube. Once done, go ahead and pry the old rim off the tire. You can also apply oil around the edges of the rim to make it easier for it to pop out. Make sure to do it evenly so as to prevent the rim from bending. Cheaper rims tend to bend easily and this makes them unable to be re-used once damaged. 5. Attach the New Rim Be sure to remove any dust from the side tubes and tires by using a wire brush. This will provide a clean and even mounting surface. After attaching the new rim, re-inflate the tire by using an air compressor. Carefully place the tire back on the hub and align the rim with the car’s wheel bolts. You can use your hands to screw in the nuts before you pick up the torque wrench. It is important to note that each vehicle has different torque specifications that are set by the manufacturer. So before you purchase one, make sure you look for one that is compatible with your car. They are a bit pricey and if you want a quality wrench you might have to spend close to $100. The car jack is used to apply a specific force to a bolt and prevent over-tightening. They make sure the wheel nuts are neither too tight nor too loose. These torque wrenches come in four styles; dual beam, bending beam, digital beam, and the click style. For the clicker, you’ll hear a click sound from the wrench once the required torque is attained. After you’re done be sure to reset the wrench to zero. This will help keep it calibrated for longer, but in case you happen to damage it, you can get it repaired by taking it to your nearest auto dealer shop. 6. Carefully Lower the Car to the Ground After you’re sure that everything is well in place, slowly lower the car to the ground until the tires have taken back the vehicle’s weight.  Afterward, proceed to gently remove the jack. Once done, attach the hubcap and repeat these steps on the rest of the wheels. When all the rims have been replaced, you’ll need to check the alignment of each wheel. You can do this through a test drive to be sure that the rims won’t pop off. Try and keep a low speed as you do so. In case the vehicle isn’t stable, you can go to your nearest shop and have a professional fix the issue. For all automobiles, the right set of rims is important.  This is because they contribute towards whether your ride will be smooth or rough. Comfort and durability come first for many drivers.  As you might have seen from the outlined steps, replacing an old rim isn’t necessarily difficult. Yes, it might take time, but the final result will be worth it. Be careful not to damage the rims or puncture your tires during the whole process as this will end up costing you, instead of saving your coins. If you still feel like you can’t manage the rim change on your own, remember, asking for help is always an option. Don’t hesitate to ask for assistance from people who are more familiar with such situations. It’s better to have it done well and ensure the durability of the car rims. Cars can say a lot about their owners. What does your car say about you? Read Also :  Useful Tips About Mobile Car Detailing To Avoid Any Costly Maintenance And Repair Issues Washing Your Car: 7 Dos And Don’ts

READ MOREDetails
Electric Vehicles

Car Insurance For Electric Vehicles Explained

You’ve taken the leap into electric vehicles, leaving behind petrol fumes and high bills at the forecourt lured by the prospect of low running costs, no vehicle tax, and low emissions. Or maybe you’re just considering ditching fuel tanks for plugs and are doing the maths, calculating whether the savings you can rack up with an EV, from the government’s rebate to lower servicing charges, can offset the higher initial outlay. While electric vehicles are exempt from vehicle tax and from charges in London’s congestion zone, and you can rack up discounts on parking permits from many councils, you can’t avoid some of the standard costs of owning a vehicle. A major, unavoidable expense is for car insurance, which is a legal requirement for any vehicle using or even parked on public roads in the UK. If you’ve never sought out or arranged insurance for an electric vehicle, you might be baffled about where to start. Cost and Providers: You may heard electric vehicles are significantly more expensive to insure and that you’ll need to see out a specialist provider. It’s true that the market for electric vehicles, and therefore for insurance for electric vehicles, is still in its infancy. As of the end of September 2018, there are just 178,000 plug-in vehicles (including fully electric vehicles and plug-in hybrids) registered in the UK, out of a total of 37.3m vehicles on our roads. But the number is rising quickly: there were 5,000 new registrations of plug-in vehicles each month of 2018, while in 2014 just 400 new plug-in vehicles were being driven off lots. With the increasing uptake of EVs and hybrids, especially in the run up to the 2040 ban on petrol and diesel vehicles, the cost and complication of insuring them will fall. Electric vehicle insurance policies will become standard fare from mainstream insurers. Today, the higher purchase price of EVs drives up insurance premiums for them, as insurers need to consider to cost of replacing your vehicle if it’s stolen or damaged beyond repair. But even now you might find insuring an electric vehicle might be comparable to, or even cheaper, than insuring a petrol- or diesel-powered car, owing to the small size and less powerful engines on EVs and the discounts some insurers can give you for driving environmentally-friendly cars. However, the process of obtaining insurance quotes and policies for an electric vehicle is different than that for EVs and a rundown will be helpful as you start your electrically-powered journey. What Impacts Cost of Insurance for Electric Vehicles: You’re probably familiar with the features of a standard vehicle that can inflate, or reduce, your monthly premiums for its insurance, including its car insurance group, the size of its engine, and purchase price. For insuring electric vehicles, there’s a new calculus, accounting for who owns the battery and the risk posed by (not kidding) power cables. leased batteries: Some EV manufacturers like Renault and Clio offer motorists the option of buying the vehicle outright but leasing its battery, with a monthly fee and mileage agreement. These arrangements spare you the steep cost of replacing batteries when they lose functionality after a few years. But if you’re leasing the battery, you’ll need to inform your insurer when obtaining quotes, as a leased battery will affect who needs to be paid if your electric vehicle is written off. Additionally, some policies may not cover leased batteries. power cables and liability: Much like your smartphone, your electric vehicle will need to be charged, just with a very big cord. If you’re charging in your driveway or garage, you won’t have to worry about the cord trailing large distances. But if you’re charging your vehicle while it’s parked on the street or at a public charging station, that cord could pose a tripping hazard. When obtaining an insurance policy for your electric vehicle, you should ensure it provides enough liability cover to protect you if a member of the public face-plants over your cable. fires from at-home charging: If your electric vehicle or cable fire while plugged in in your driveway or garage you might wonder which insurance policy will pay out: your home insurance policy or the one for your car. That ultimately depends on where the fire originates, but the risk of an electric fault within your vehicle causing a fire that then destroys you home can push up premiums for car insurance for EVs. green discounts: Some insurers will offer discounts of up to 5% on your annual premiums as a reward for you driving an environmentally-friendly car. Others will make charitable donations to green causes in your name from your premiums or plant a certain number of trees. Read Also: Why You Need Classic Car Insurance? 7 Reasons Why Teenagers Pay Extra For Car Insurance

READ MOREDetails
Used Car

10 Reasons to Purchase a Used Car

Looking to buy an inexpensive car? Then think about buying a used car rather than an expensive new car. Buying pre-owned vehicles can provide the same comfort as a new car, provide quality transportation for years, and can significantly save you money. Here’s a list of reasons why you should buy a used vehicle. 1. Cheaper price tag: The price of a used car is a lot less intimidating than the price of a new car. New vehicles are great to have, but cars still lose most of their value early in their lifespan. The inevitable law of depreciation remains a significant reason to purchased used cars instead. 2. Several options: If you’re buying a new car, there are only a few brands and models available for you to choose from. But, when you purchase a used vehicle, you can look around and pick a specific car that best suits your needs. 3. Cheaper insurance rates: New car insurance can be cheaper. However, the insurance rates for a used car are less expensive than they would be for new cars. It means you will be saving money on the vehicle itself and on your insurance, both at the same time. 4. Cheaper registration fees: The same as with car insurance, several states charge a cheaper fee to register a vehicle if it has a lower transaction price. While some states increase its registration fees to generate more income, purchasing a used car is a good way to avoid rising registration fees. 5. Used cars now are much more reliable than in the last century: With the help of today's technology, vehicles are designed and manufactured to last longer, which makes modern used vehicles more reliable and dependable. 6. Negotiate the price: You can purchase the vehicle for lower than its asking price if you successfully haggle about its price with the seller. 7. Cut down on maintenance costs: Maintenance costs tend to be cheaper when you purchase a used car. You can also save money on internal configurations, premium oil, and more. 8. Less depreciation: Brand new cars are bound to lose around half of their value in the first five years after purchase. However, used cars do not depreciate so fast, making your purchase a good investment. 9. Cheaper customization costs: Since you’re purchasing a used car, you may install features on your own at a more affordable price than on a new car. 10. Certified pre-owned vehicles: Certified pre-owned vehicles assure buyers that they’ll be getting a car that drives like new. It also ensures buyers that they’re buying quality and thoroughly inspected cars at a bargain price. Certified pre-owned vehicles may sometimes have an extended warranty, unique financing, and other benefits. Buying used cars in Utah, Florida or any state is exciting, especially with several great options to choose from on the market today. These are some of the reasons why buying a used vehicle is worth it. Read Also: The Top 3 Fastest Ways To Sell Your Car Privately 7 Reasons Why Teenagers Pay Extra For Car Insurance

READ MOREDetails