Why Metal Studs are More Suitable for Your Construction Works

17 August 2019

When it comes to building structures, it is preferable to consider using metal studs in place of wooden studs for non-load bearing walls. Research shows that more than 50% of structures are built with metal studs made from cold-formed sheets.

However, metal studs conduct cold, but builders prefer using metal studs in place of woods for the following reasons.

1. Metal studs are lighter than wooden studs and convenient to work:

Metal studs are lighter in weight than wooden studs because of their hollow shape. This makes them less bulky than wooden studs in terms of transportation and storage.

When cutting metal studs using aviation snips, there are no sawdusts, unlike cutting through wooden studs. But it is advisable to protect your hands from sharp ends using gloves, especially during galvanized steel frame building construction.

2. Metal studs are easier to handle:

In terms of installation, metal studs weigh far less than wooden studs and are held in place with screws. Therefore, it easy to correct installation blunders with metal studs.

3. Metal studs are less prone to attacks from atmospheric elements:

Metal studs are not inclined to stresses and uneven shrinkage. Unlike wooden studs, which are susceptible to such factors with time. Also, metal studs are more resistant to mold and rot, which are common wooden infections. Although metal studs rust with time, this is preventable by installing a vapor barrier on the concrete floor. This explains the durability and sturdiness commonly enjoyed with galvanized steel frame building.

4. Metal studs have a higher tensile strength than wooden studs:

Metal studs have a higher tensile strength and flexibility than wooden studs. Therefore, they are preferred for construction in wind prone areas and seismic zones like the Gulf Coast states of the USA.

5. Metal studs are resistant to fire and insect attacks:

Metal studs are not prone to insect attacks like carpenter ants and termites, which can cause grave damages to wooden studs. Also, in terms of fire outbreaks, metal studs are fire resistant and do not burn in the case of a fire outbreak, unlike wooden studs.

6. Metal studs have a higher cost advantage:

Wooden studs cost 15% lesser than metal studs, but metal studs offer cost advantages in other areas. These advantages cut across warranty call-backs in the sales of metal studs are much reduced because metal studs are not susceptible to shrinkage, and additional stress-related factors.

Buildings built with metal studs do not have cracks or nail pops to fix after completion. Therefore, scraps are significantly reduced. Up to 20% wastage is recorded when wooden studs are used in construction. Hence the cost of disposing of discarded materials is decreased considerably.

7. Higher insurance discounts:

Owners of buildings built with metal studs enjoy a higher insurance discount due to lower risk factors. Unlike buildings built with wooden studs, which attracts a higher insurance premium because of their higher susceptibility to fire and other environmental factors.

Conclusion:

Metal studs are preferable for buildings because they are environmentally friendly compared with wooden studs. They can be recycled and are readily available in similar wooden dimensions.

Read Also:

Ariana Smith

I enjoy writing and I write quality guest posts on topics of my interest and passion. I have been doing this since my college days. My special interests are in health, fitness, food and following the latest trends in these areas. I am an editor at Content Rally.

View all posts

Best House Renovations For 2021

Our house is your safe space and source of comfort. Aside from it needing to be maintained, it is also essential that you give it a new look and some renovations now and then. House renovations provide an upgrade for your convenience and overall home experience. If you think that your house is becoming dull and outdated, it does not mean that you need a new home. Aside from availing of a new place will cost more enormous expenses for you and your family, it could be that your house only needs a makeover. An upgrade on some parts of your home will not hurt your pocket that much! As long as you know what renovation your family needs and can afford, it is wise to do the necessary upgrades in your home. You can ask for help from professional builders to guide you on how you will go about the renovations. Most of the time, people think those home renovations are for aesthetic purposes only. But little did they know those home renovations uplift your family’s quality of living step by step. It is always better to look for rooms of improvement and strive to give your family the best comfort inside your home. Get builder quotes and hire builders that best suit your preference and budget. Comfort comes from advancing your quality and ways of living. It means that doing necessary home renovations is crucial in making your home a safe, secure, and people-friendly place. Here are some renovation ideas you can consider if you want to upgrade your home to maximize its spaces and potentials. 1. Bathrooms Bathrooms are the most intimate part of your home. Here is where you can spend personal time to take care of yourself and relax. A bathroom renovation or Turning your bathroom into a sanctuary will allow more positive energy and comfort during me-times. You can have a bathroom sanctuary by putting relaxation agents of your home inside your comfort room. You can have a fireplace, plants, and spa corner inside your bathroom. If you are hesitant because of limited space, hire builders to help you develop the best bathroom sanctuary appropriate to your available bathroom space. 2. Use Natural Wood and Light Natural wood finish is not only aesthetically pleasing but is also sustainable. Having wood crafts and wood materials inside your home means having the best furniture and building materials that will last for a long time. With proper maintenance, wood finishes can last for years. It makes your home renovation efficient and durable. On the other hand, natural light means less electricity bill and makes your house benefit from sustainable energy. For the best woodworks and lighting set up, get builders quotes and get advice from the best builders right on time and right on budget. 3. Get an Indoor Gym If you have extra space or room inside your home, you can turn it into an indoor gym. There is no need to spend time stuck in traffic or pay a membership fee at the gym with an indoor gym. Indoor gyms allow you to get fit and healthy while staying in the comforts of your home. It can also be an area where you can have family bonding time by exercising together. Get advice from the best builders about the placement of gym equipment and tools for your indoor gym. 4. Have a Built-In Storage Built-in storage is best if you want to be intentional with the available space you have in your house. It can be through a form of hanging, elevated, and installed in the walls of your home. Wall-mounted cabinets are better than standing ones, especially if you have playful kids inside your home. It allows you to store items in a place that is not reachable for kids. It is also best when accessing items while walking through the living room, bedroom, and even in other parts of your home. Get builder quotes and know how much it costs for a professionally made wall-mounted cabinet that best suits your home. 5. Home Office The Home Office is best for people who are working remotely. Having your office at the comforts of your home allows you to work while staying safe with your family. A home office can be your personal station where other people cannot bother you. It saves you from the stress of traffic and pollution outside your house. You can just put your computer, printer, files, and other work equipment that you use for office and other professional work. Having a home office also relieves you from the stressful environment of the office far away from home, which is your source of comfort. At the same time, with a home office, you can attend your office and home responsibilities at your own pace and time. You can hire builders to help you build your home office. 6. Multifunctional Rooms A space or room in your home can be multifunctional and serve two or more purposes at the same time. A multifunctional room is best for anyone in the family who has a hectic and strict schedule. You can have your workspace and grooming space in one room, on both ends. It saves time and energy to have a room where you can do two or more tasks and roles all at once. In a multifunctional room, you can attend yoga classes and zoom meetings afterward. It can also be a multimedia and entertainment room for your family. It is efficient because it allows your family to convert the other available spaces into essential home spaces to serve a purpose for every member of the family. It can be hard to decide what functions you will assign for every available room. It is always wise to ask professional advice and guidance in doing this kind of renovation. It should always be towards the goal of maximizing the space and potential of a room to serve different significant purposes for the family. You ask for builder quotes and know how much it costs to have an efficient multifunctional space that does not sacrifice time and mobility. Read Also: How to Keep Your Bathroom Clean All the Time How to Choose the Best Window Glass? How Do You Match Sofas With Accent Chairs?

Top 4 Must-Have Appliances In Every Kitchen

The kitchen is without a doubt the most happening room in a house and is, therefore, an essential room as well. However, not every kitchen can be fully functional and efficient unless they have some crucial appliances. If you are in the process of setting up a kitchen in your home, then today we bring you a list of the top 4 must-have devices in every kitchen. Top 4 Must-Have Appliances in Every Kitchen: Cooktops A cooktop is an essential appliance in any kitchen. As there are lots of options available when it comes to cooktops and ovens, most of us get confused on which one to buy. The fuel used is one of the most important aspects to think about while choosing a cooktop. There are latest gas cooktops, radiant cooktops, and induction cooktops that are available in the market. Out of all the three, induction cooktops are the most energy efficient, however, you need to use only cookware with a high level of ferrous metal content to be able to transfer the heat to the cookware. Both induction and radiant cooktops offer a clean and modern look to the kitchen as they can be installed without any visible parts on the outside. Gas cooktops, on the other hand, are cheaper and quite easy to install, however, is harder to clean than induction and radiant cooktops. Ventilation Hoods Most of us think that the only purpose of a ventilation hood is to remove the heat and steam from the kitchen. Well, even though it is the primary objective of having a ventilation hood, it also helps in removing the grease and fat content in the kitchen air, thus helping to keep the appliances, cabinet, walls, and roof of the kitchen free of oil. The efficiency of a ventilation hood depends on how much air it can move through the hood per minute. It is measured regarding Cubic Feet per Minute or CFM. To put it in perspective, for a kitchen with a four-burner cooktop setup, a ventilation hood that has a rating of 400 CFM or above is recommended. You can either opt for a duct-free, recirculating or externally ducted ventilation system. As an externally ducted ventilation system pulls out the hot kitchen air all push it outside the house, it is the most efficient one. However, implementing an externally ducted ventilation system hugely depends on your home layout. Refrigerators A refrigerator is another vital appliance in every kitchen. Freestanding, Fully Integrated (Columns), and Inbuilt refrigerators are three of the most common types. Freestanding refrigerators are the ones that we see in most homes, which are a standalone appliance that offers high capacity and are easy to relocate. Inbuilt refrigerators usually come with a size that comfortably fits within countertop depths to provide a seamless look. Fully integrated refrigerators are wholly flushed into the design of the kitchen and can be hard to distinguish from the rest of the cabinetry in the kitchen. Check all reviews for the best refrigerators in Australia. Dishwashers Just like refrigerators, dishwashers can also be bought as a separate appliance or can be installed flush within the cabinet of your kitchen. While choosing a dishwasher, look out for the rack types that are featured within the dishwasher and also look out for the sound rating of the dishwasher. Dishwashers tend to produce quite some sound while working, so to avoid any annoyances, pick one with the least decibel rating. Also, if you will be using the dishwasher quite frequently, then you should also check out the energy star rating and pick the most efficient one to make sure that you do not incur a hefty electricity bill for using the dishwasher. Final Words: We hope that the above article on the appliances that every kitchen must have was informative. In case you would like to give some input for this article, feel free to leave a comment below. Read Also: 9 Feng Shui Tips For A Calmer Kitchen Installation Of Kitchen Cabinets: Best Way To Give Your Home A Perfect Facelift

7 Important Factors You Must Consider Before Renovating A Commercial Roof

The roof is important for any commercial building. If your roof is broken, it exposes precious belongings that incorporate certain expensive commodities. In most of the commercial buildings, roofing projects often stand out. It is necessary for your home to be protected from the harsh elements. For this, all you need is a reliable roofing company that can offer you these required services. It is important to remember that remodeling and renovating your home is an intensive undertaking with several potential pitfalls. Before you can think of renovating your commercial roof, there are a few considerations to make. This article will emphasize factors you should consider before renovating a commercial roof. Top Considerations Before Renovation Of A Commercial Roof Here is a list of guides to help you fix your commercial building roof. 1. Roof Ponding Before you can contact a roof contractor, you need to inspect your building to see if there is any ponding. Therefore, you need to observe if there is an act of accumulation on the roof. This will indicate you have an issue and might also face certain drainage issues. Excessive ponding might also lead to algae growth. This causes permanent harm to the rooftop. Ponding indicates the right sign your roof is getting damaged, and it is time that you get into reroofing. 2. Determine The Material That Fits The Best Thinking of renovating the commercial space is a great way to look functional. But at the same time, it is also expensive and time-consuming if you do not pay attention to the included material. Before initiating the renovation, create a plan outlining the materials you need and the purpose. This will help you delegate the project effectively. Researching the materials in advance will help you renovate appropriately, last longer, look great, and cost much less. Not only will certain materials dictate aesthetics, but they will majorly reflect attributes in the home’s new design. When you are taking on home renovation projects, make sure you choose the right materials. 3. Consult An Insurance Company If you need to replace the roof, it might be due to bad weather, so ensure it from an insurance provider first. There are certain contractors who are more happy about helping one another during the time of processing the claims. So look for an insurance provider who can clear your doubts and get you all the valid information required to proceed with the claim. In addition to that, they will try to get the insurance company to pay according to the damages. Similarly, you might also get a new roof without spending as much. 4. Prepare A Contingency Plan Renovating your home is an exciting undertaking. It requires thorough planning and research. Similarly, knowing if you can prepare a contingency plan for any potential issues is vital. An unforeseen issue might occur throughout the course of the renovation process. Thus, your contingency plan should include details about what you would need in certain cases, what can go wrong, the material required, and design decisions. Hence, a comprehensive contingency plan can equip you and assist you in tackling unanticipated issues instantly. Moreover, you might not have to cause much of a disturbance in your renovation timeline. 5. Check The Paperwork When you are dealing with something as vital as your roof, you do not wish to leave anything else to change. For any contractor, it lays out how much you would need to pay and how much time they need to install a new roof. In addition to that, the paperwork can include all pertinent details on what permits you would need to make the new roof within your community. In the end, you should also receive a letter from the contractor’s insurance providers and communicate exactly what is under the business liability plan. Commercial Roofers, similarly, can also help you with the renovation process and install a new roof. 6. Anticipate The Budget Determining and setting the right budget is important before you can contact any roof contractor. You might develop a limit or have an expensive amount, so consider your decision. Thus, setting a budget makes you plan about every attribute in the renovation project. Dreaming about a luxurious change that might increase your home's value is easy. Therefore, create an estimated labor charge, material and decoration costs, and a contingency fund. Build up a detailed calculation and cost breakups that will keep you on the right track and assist you in saving time and resources. Furthermore, keep all your expectations in check today. 7. Obtain The Right Permit Before you can start with the major renovation, it is vital to know about the local areas and obtain the necessary permits. This could be acquired for a permit from the country or city before you can begin the construction process. This is a specified requirement if you are undertaking any work affecting the home structure, plumbing, or electrical system. Thus, by doing so, you need to protect the roof in the long run and save resources while ensuring that renovation will be handled professionally. Furthermore, obtaining the right permit can avoid legal issues with the local authority, and it is worth going through the entire stage. Hire The Best Roofing Contractors Thus, finding a listed contractor is an integral factor. This is because it would ensure your home is in tip-top condition. If you know business owners who offer commercial roofing repairs, research before hiring contractors. When you finally consider the essential requirements before renovating a commercial roof, you must hire the best contractor. You must look for contractors with the expertise and skills to install and replace a roof. Ensure they carry their material and tools as well. Therefore, a roofing contractor can offer significant advice on roofing installation and repair. Make sure that roofing projects are conducted properly with qualified materials. Furthermore, roofing contractors carry liability insurance, so you only need to protect yourself if any mashup or accident occurs. Thus, roofing contractors offer invaluable skills and knowledge regarding roof installation and repair and valuable protection from damage. Read Also: Choosing A Siding And Roofing Companies In Delaware What To Know About Commercial Greenhouse Flooring Why You Must Use A Residential Roofing Company For Your Home

Why Metal Studs are More Suitable for Your Construction Works