5 of the Biggest Myths about 3D Printing

by

17 September 2019

Technology

3D printing

3D printing is a paradox to many with a lot of myths and misunderstandings. Many folks talk about 3D printing with so many misconceptions and false information. Dubai is leading in many areas, including technology, such as 3D printing. Although many people do not understand how this technology works, a 3D printing company Dubai specialist and other key players know the benefits.

Why 3D Printing is Popular

3D printing is not only used by inventors, but also by enthusiasts to turn their concepts into reality. Printing a model is easier and affordable compared to creating one from scratch by hand. When it comes to low quantities in production, this technology can be used to create and test products. This process can be done severally, cost less, and produce effective goods compared to the conventional way.

Printing from home or seeking a 3D printing company Dubai specialists keeps your designs private, reducing the possibility of imitation. Likewise, you can share your designs with an online community and interact with like-minded individuals.

Apart from printing models, 3D printers can print end products ready for the market. In today’s world with mass manufacturing, things like tailor-made toys are expensive; however, 3D printing solves this problem.

3D Printing Myths

3D Printing Myths

3D printing has been around for over a decade, but most folks still hold on to their myths about this great technology. The misconceptions are both positive and negative.

Below are the biggest myths about 3D printing:

1. 3D Printing is Expensive

Many people believe that 3D printing is not only expensive but agonizingly slow. However, this was true in the previous years, where you needed expensive equipment and materials. You also used the tiresome trial-and-error method to improve the designs.

This changed when a variety of new methods were introduced. These techniques allow any 3D printing company Dubai specialists to improve their products. You can also print in minutes, and the printers are cost-effective. The prices continue to fall as the manufacturers use cheaper but effective materials.

2. You Can Only Print Small Products

Any 3D printing company Dubai specialist will tell you that a 3D printer is not large. They are made this way because they need an airtight chamber to work. Most folks believe that printing in bulk would be a waste of time, while others claim that plastic filament cannot make strong products. However, methods, such as Big Area Additive manufacturing, function in the open air, and produce sturdy pieces. They are used to create a wide range of products from jet fighters to automobiles. Recently, the printer bot has been used to rapidly add fast-hardening materials in the construction industry.

3. 3D Printing Results in Poor-Quality Products

The most laborious process of creating a 3D product is ensuring that the result looks good. A common myth that many people stand by is that you cannot print quality goods using this technology. However, some new methods like Digital Light Synthesis help generate elaborate products from the start. The high-quality finish happens because the process does not require layering. The outcomes are monolithic meaning that they come out as a smooth liquid. Other people also combine hybrid systems that used 3D printed goods with traditional finishes.

4. 3D Printing Can Make Artificial Organs

Bioprinting is an exciting element in additive manufacturing. Many patients wait eagerly waiting for 3D printed kidneys, hearts, and other vital organs. Today, any 3D printing company Dubai specialists can easily customize orthodontics, prosthetics, and hearing aids. Some people believe that with the advancement in technology and especially in 3D printing, we could develop organs very soon. However, scientists are yet to discover how to create such sophisticated items. We can create a network that can support muscles and living tissues; however, we cannot create the tissue itself.

5. Small-Scale Players will Dominate the Market

Some folks believe that 3d printing would usher in a new era of people using this technology to produce small quantities for their use at home. In reality, only a few folks own 3D printers. Educational institutions and corporations own the majority of these machines, and this might not change any time soon.

3D printing might bring an era where manufacturers benefit more from this technology when compared to civilians. This technology can help industries to create a different product every month depending on consumers’ demands. This way, companies can reap more by specializing in a wide variety of products. Eventually, the market will get a new wave of diverse industrial giants that cater to different customers.

3D printing might be new to some, and it might be complicated to others. Although the art of 3D printing has been around for over a decade, some folks still believe myths. Creating vital organs such as hearts and other internal organs is only a myths. It is important to get information from specialists to avoid misinformation.

Read Also:

adaptive robots

PREVIOUS POST

Are Adaptive Robots The Next Big Thing?
POS Technology

NEXT POST

How New POS Technology is Advancing Merchant Processing

Tags

author-img

I enjoy writing and I write quality guest posts on topics of my interest and passion. I have been doing this since my college days. My special interests are in health, fitness, food and following the latest trends in these areas. I am an editor at Content Rally.

View all posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Popular

Creating A Startup Idea

Technologies For Creating A Startup Idea

20 Feb 2023

How to Download Facebook Videos

How to Download Facebook Videos on Android?

07 Feb 2019

Ecommerce Web Design

7 Rules of Effective Ecommerce Web Design

28 Jan 2021

wordpress-1863504_960_720 edited

The 10 WordPress Plugins Every Sucessful Blogger Uses

28 Jan 2017

Follow Us

Recent

role of sound design in advertisements

Role Of Sound Design In Creating Memorable Advertisements

04 May 2024

Data-Driven Insights And Enhancing Customer Experience

Data-Driven Insights And Enhancing Customer Experience

02 May 2024

Cryptocurrency Conversion Calculator

Simplify Your Conversions: A Powerful Cryptocurrency Conversion Calculator

02 May 2024

Car Hoists

Choose Quality Car Hoists From The Premium Car Tools Suppliers

26 Apr 2024

Related

AC Repair Austin
Technology

AC Repair Austin: Tips on How to Choose an AC Unit

There are plenty of reasons why some homeowners might be hesitant about purchasing an air conditioner for their humble abode. One of the most significant reasons is the fear that buying an AC unit might cause energy bills to skyrocket. It is an understandable fear, as those who might not understand how their AC works are not in a position to save money through energy-saving methods. It is the reason why so many ends up having their units serviced by AC repair Austin. Fortunately, you do not have to resign yourself to eventually paying hefty repair bills for your AC unit, as it can be easy to figure out what needs to be done. Here are just a few tips when choosing an AC unit to ensure that you only need AC repair Austin when absolutely necessary. Tips on How to Choose an AC Unit: Ensure you are purchasing a model from a reputable source While the availability of specific sources might be tricky depending on where you live, there are always more than a few sources you can trust in your area. Manufacturers such as Trane can guarantee the quality of their units as they are one of the industry leaders when it comes to air conditioners and heaters. While deciding on Trane ensures you have no trouble with choosing an excellent unit for your home, it does not mean that the rest are not worth looking into. All it takes is a little bit of research to save you from unnecessary repair costs in the future. Be aware of how you intend to use your AC unit Keep in mind that not all air conditioners are made equal. There are some models that are better off in certain types of houses, and the same can be said about all the other model types. It is a good idea to ask the seller questions regarding your home, as well as explain how you intend to use the AC. Whether you want to have it cool the air in one room or several, you will have plenty of options to choose from. It will also ensure that when you eventually need to hire an expert in Austin HVAC repairs, you will not have to pay more than necessary. Keep the air flowing freely in your home Last but certainly not least, there is also the issue of how air flows around your household. Make sure to check whether or not some of your furniture has blocked the opening of specific vents, as it can be surprising how many homeowners forget the placement of vents and block them with a sofa or other item. It is also a good idea to figure out if you want to block the vents to keep the cold air from escaping specific rooms. If you happen to have questions regarding the model you are purchasing, your best bet is to research on AC repair Austin. Otherwise, the tips above are more than enough to help you make the most out of your purchase! Read Also: Removing Air Conditioner Filters: A Guide Don't Get Caught in a Heatwave: 5 Signs That Your AC Is About to Go Out

READ MOREDetails
Waterjet Vs. Laser Cutting
Technology

Waterjet Vs. Laser Cutting: Which Is Worth The Hype?

Waterjet and laser cutters can slice through materials that no other cutting tool can. They are invaluable for prototyping products and precision manufacturing. But which one is worth the hype - waterjets or laser cutters? This article provides everything you need to know about waterjet vs laser cutting units. Learn how they work and which one is best for your industrial manufacturing facility. Waterjet Vs Laser Cutting: Unlike the vast majority of blades and saws, waterjets and laser cutters don't have a blade. The lack of a blade makes engraving and detail work much more precise. And, waterjets and laser cutters are computer operated, as to achieve a very high level of precision. Both machines can engrave minute lettering and symbology into a wide range of manufacturing materials. But each machine goes about it a very different way. Both methods of cutting excel with 2D objects and engraving, but which is better: waterjet or laser cutting? What Is Laser Cutting? Laser cutting uses a high-focus laser to cut or engrave materials. Laser cutting is a method of subtractive manufacturing, which means it only takes away material. This is in opposition to additive manufacturing, like 3D printing. Special software guides the lasers using mirrors. A gas power source provides energy to the system, usually in the form of CO2. The CO2 fuels the laser which outputs between 1,500 and 2,600 watts. Some systems implement an additional gas jet to expel the excess material. Laser cutting is a very precise form of subtractive manufacturing. The intense heat of the laser cuts through material like a razor using a precision burn. Laser systems cut material from sheets or large panels. Laser Cutter Materials: Laser cutting systems make precision cuts in a wide range of materials. The only material that a laser cutter is not "cut-out" for is reflective metals. The reflective property of some metal reflects the laser off of the cutting surface, which can be dangerous. Laser cutters are great for cutting glass, wood, plastic, and a wide range of metals. Laser cutters encounter obstacles, however, when trying to cut compound materials. If the material contains multiple materials, then it has multiple melting points. If the material has multiple melting points, then a laser takes longer to cut through it, and cuts can become uneven. Laser cutting systems work the best with flat sheets of material, with a thickness range between 0.1 inches to just under a half-inch. And, most laser cutting systems proficiently perform the functions of cutting, drilling, engraving, welding, ablating, and structuring. What Is Waterjet Cutting? Waterjet cutting systems utilize a high-pressure waterjet to slice through materials. The water is shot through a very fine point and creates over 60,000 pounds of pressure per square inch. For tougher materials, a mixture of water and an abrasive acts like a diamond saw blade. Garnet is a common abrasive for use in waterjet cutters. Aluminum oxide is another common abrasive that you can use with a waterjet cutter. The process of waterjet cutting is a high-speed version of natural erosion. With a big enough waterjet cutter, you can make another grand canyon in a fraction of the time. Read more about how the best water jets can cut through anything nature makes. Waterjet cutters differ from laser cutters in that the power source does not reside with the cutting unit. Since a waterjet cutter outputs between 4 to 7 kilowatts, the water pump is located away from the worksite. This is also true because the water source is rarely nearby your bench. Waterjet Cutting Materials: Unlike a laser cutter, waterjet cutters can effectively cut almost any material. They have no problem cutting through compound materials with multiple material types. The pure pressure of the water jet is enough to cut cleanly through anything. Waterjet cutter units are especially useful for cutting precisely through masonry. They're also good for cutting and structuring stone, thick metals, ceramics, and glass. Waterjets handle thicker material than laser cutters. They can handle material that is up to around 2 inches thick. But they don't do as well with material thinner than 0.4 inches. Level of Waste from Waterjet vs Laser Cutting: Laser cutters create a minimal amount of off-fall and waste. Very little, if any, cleanup is required after cutting. The only waste that laser cutting produces is a small amount of dust that is easily vacuumed up. Waterjet cutting, on the other hand, creates a lot of waste. You might think that waterjet cutting would be cleaner, but it is not. The abrasive material in the water adds a toxic element to the off-fall liquid. For this reason, waterjet cutting requires special waste-water disposal, safety gear, and a bigger project budget. What's the Cost to Purchase and Operate a Waterjet vs Laser Cutter? A plasma laser cutting machine will cost between $15,000 to over $250,000 at the initial purchase. Waterjet cutters are more expensive because they require more specialized materials. They range from $100,000 to around $400,000. On average, either machine will cost around $350k. Expensive industrial machines can exceed $1,000,000. On average, a laser cutter costs between $13 to $20 an hour to operate. Waterjet cutting systems run between $15 to $30 an hour to operate. Final Thoughts: At the end of the day, waterjet cutters cost up to five times more to operate than laser cutters. Waterjet cutters can cut thicker and more complex materials, but they are slower than laser cutters. So, when considering waterjet vs laser cutting, laser cutting will save you time and money. If you like this article on which is better, share it with your friends on social media. And check out the blog for more resources on hardware and gadgets. Thanks for reading! Read Also: How Portable Metrology Tools Are Making Manufacturers More Flexible

READ MOREDetails
pc
Technology

2018 Signs It’s Time to Upgrade Your PC

Ever notice something odd with your computer, like it has been more sluggish than it was yesterday or that the blue screen of death is becoming a common occurrence? How do you know when it’s time to take it to the shop for repairs or it’s finally the time to put parts or the whole system entirely to the junk? Sometimes, the most noticeable issues are just part of a big problem, and the reality is that a computer, just like many things, will eventually grow old and become unusable. That is why it is a good idea to know what signs to look for when you’re unsure. If you’re second-guessing whether you should upgrade or completely replace your computer, there are things you should consider. Here are some signs to watch out for. Really Slow Performance: It’s time to upgrade if you’ve done everything to make sure your computer's hardware drivers and operating system are updated, but it still runs slow. You may have also checked for malware and made sure that the versions of the applications you’re using are not the cause for it running slow like a turtle. It may mean that the inevitable has come and it’s time to let go of your computer. This doesn’t mean you have to completely trash everything, because the beauty of owning a computer means you can just take out certain components and replace them with something new. You may also choose to completely replace the CPU without doing the same for the monitor and peripherals. You Need a Faster PC:  Signs of breaking down and slow PC are not the only reasons for upgrading. Sometimes, you just need something that’s fast enough that can cater to your needs. You may play games on your desktop computer but have taken up a hobby like editing, so you need something more substantial that will allow you to do these things and more. These applications are heavy on low- to mid-spec machines, but higher-end ones may be able to run them without any problems. The same is true if you like to open many tabs on your browser. Additionally, new software may need new specs that can only be seen in the more current components. If your needs have changed, you may upgrade your PC as you see fit. You Want New Hardware: If you want to connect new hardware on your computer but find that you can’t, it’s a sign that it is outdated. For example, if you have VGA ports, it won’t be compatible with devices that connect with HDMI, USB 3.0, and USBC. If you can get away with upgrading the minimum amount of components on your PC, then go for it. If not, maybe it’s time to look around for new parts. Constant Overheating: Most PC owners will know that overheating is never good for the machine. One of the primary reasons your computer may be overheating is because there is a lot of accumulated dust and dirt on the fans. It is important to keep the fans clean so that they will do their job of ventilating the components when they are in use. However, if the fans are already cleaned and the computer still overheats, accompanied by grinding and clicking sounds, take it as a sign to upgrade. There are many reasons this happens. It could be that your hard drive is about to permanently fail or your fans are going to break down. Generally, if you spend more time trying to fix things you think are manageable more than using your computer for its intended use, then it’s time for you to think about getting a new one. Something Is Obviously Broken: If you have PC parts that are actually physically broken, you can have them either repaired or replaced. However, you need to think about whether it is worth your time and money to repair items than to replace them because there are some parts that are easier to fix and others that are easier to swap with something new. You need to prioritize replacement if your PC has major damage that affects other parts or how you use it. Build Your Own PC: If you’re thinking about completely replacing your computer or just your CPU, consider building your own using a PC parts picker because you get to control your budget and select components to be prioritized according to your needs. It lets you pick components you want, and it makes sure that all parts are compatible, so you won’t have any problem when it comes to installing all of them together. If you aren’t, it’s fine. Just make sure that you faithfully do all the cleaning, maintenance, and upkeep especially if you have an older computer. There’s a difference between common issues that are easily fixable and major ones that require immediate attention. What are some more signs that it’s time to move on from your old PC? Share your thoughts below. Read More:  How To Play PSP Games On A PC? The 10 Best PC Gaming Desk Accessories in 2018. Top 4 Reasons to Outsource White Label PPC for Your Business.  

READ MOREDetails