What Can A Professional Sewer Line Camera Inspection Do For You?

Published on: 19 November 2022 Last Updated on: 20 February 2025
Camera Inspection

Sewer cameras are heaven-sent for plumbers. As the name implies, the device helps plumbers inspect hard-to-reach plumbing lines underground without needing to dig.

It is a simple contraption consisting of a long, snake-like rod with a miniature camera attached to the end. The slinky design allows plumbers to navigate the camera into the pipes and lets them see if there’s damage or leaks in the pipelines without going underground themselves.

What Is Involved in a Sewer Camera Inspection?  

What Is Involved in a Sewer Camera Inspection?

In the days of yore, inspecting a sewage system was no easy feat. Plumbers would have to get dirty and go underground themselves just to check if there’s anything amiss in the system. Sometimes, plumbers would have to do this several times to ensure they covered everything.

With the development of sewer cameras, sewage system inspections are done much more efficiently and conveniently. A sewer camera inspection can quickly identify any problems in your sewer pipes, eliminating any guesswork and allowing plumbers to identify and resolve minor plumbing problems before they worsen.

Types of Sewer Cameras

Types of Sewer Cameras

There are currently two types of sewer cameras, and both are listed below.

 1. Reel-Based  

This camera is equipped with a large-sized cable reel. Plumbers often use it when they inspect sewer and long drain pipes. The cable can be connected to a video recorder or a laptop through which the required pipe images are relayed.

 2. Hand-Held    

This sewer inspection camera is well-known for its portability. It is commonly used to check blocked drains in residential areas. Plumbers typically have this camera in their hands while they perform a sewage inspection. Since it is lightweight, plumbers can easily bring this camera around while they work.

Benefits of Using a Sewer Camera

Benefits of Using a Sewer Camera   

A Denver plumbing expert said a sewer camera inspection is the best way to find out what is happening beneath your house. Specifically, this modern plumbing device offers the following:

 1. Timely Repair

It is better to prevent plumbing issues than allow them to worsen and cause costly repairs later. A sewer camera inspection can help you achieve this. It can even be expanded so old plumbing fixtures can be included, and hidden issues can be detected.

2. Soil Assessment

One common problem in any plumbing system is a broken or leaking sewer line, which could be due to soil movement, as it can cause pipes to move and crack. A sewer camera inspection can help you determine this and fix the problem in no time.

3. Quick and Accurate Diagnostics  

Sewer cameras relay the images back to the overground monitor in real time. It means it will be a lot quicker than traditional inspection methods, where a plumber would have to get down literally and dirty. Diagnostic mistakes are also cut down to a minimum because plumbers can check several times just to make sure they have made the correct findings.

4. Lawn Protection    

Before sewer cameras, the only way to locate a crack in your water pipes was to dig a large hole through your lawn. Digging can cause damage to your grass, shrubs, plants, and trees.

As mentioned earlier, sewer cameras require no digging. This saves you money and time, but more importantly, you get to keep the beauty of your lawn.

5. Quick Clog Identification

The typical sewer camera can detect all kinds of blockages and identify the source. If the clog cannot be found in the drain area, it is usually located in a deeper part of the pipelines. Sewer cameras make it easier and faster for plumbers to locate the problem, even if it’s deeper underground.

6. No Permits

Previously, plumbers had to secure a permit before they could dig in your yard. These days, they can just use the sewer camera to see right through your pipes and identify the problem.

7. Better Property Appraisal    

A plumbing inspection is not necessary to determine a property’s value. However, it can help you better understand its true worth. Sewer camera inspections can help you identify potential plumbing problems and make any necessary repairs. A property with no plumbing problems can attract more potential buyers and increase the market value of your property.

8. Retrieve Lost Valuables

Although this can be considered a bonus, a sewer camera can locate valuables, such as an earring or a necklace that was accidentally flushed down the drain. If the plumber finds anything of value in your pipelines during an inspection, you can ask them to retrieve the item for you.

9. Future Problem Prevention  

Old plumbing pipes can cause irreparable damage to your walls and even your basement. This often remains unnoticeable until it is too late. A plumbing camera can perform a quick inspection of your home, identify a problem, and you can have it fixed before it becomes serious.

Key Takeaway  

Modern technology has enabled man to create many advanced equipment and devices. The sewer camera is a prime example since it has become invaluable in the plumbing industry, making underground sewage inspections much faster and easier.

A broken underground pipe that could only be reached through a dug hole in your yard can now be analyzed through a remote monitor.

This allows for a faster and better resolution of many plumbing problems and inspires many homeowners to contact a plumber when they need help with their plumbing.

Additional:

Content Rally wrapped around an online publication where you can publish your own intellectuals. It is a publishing platform designed to make great stories by content creators. This is your era, your place to be online. So come forward share your views, thoughts and ideas via Content Rally.

View all posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Related

Horizontal Directional Drilling

Highlighting the Benefits of Horizontal Directional Drilling

Horizontal directional drilling is a relatively new practice for installing pipes and cables underground. Many other practices like Rotary Drilling exist but here we will talk about directional drilling. Although the more conventional method of open trenching is still relevant today, directional drilling is slowly becoming a preferred process due to its inherent benefits. Most projects involving laying pipelines for utilities and cables for telecommunication face the challenge of obstruction and limited work area, hence the need to minimize the disturbance while at the same time ensure that the pipes installed are sturdy and high-quality. What is horizontal directional drilling? The simplest way to understand the process of directional drilling is the use of a special rig to create an underground borehole to produce a path where pipes will be installed. This special rig consists of a drill head with an automatic tracking device which allows the operator to navigate the pre-set route underground. Drilling fluid gets added in as the drill bit passes through the soil, to prevent the hole from collapsing. After the drill bit exits the pilot borehole, a reamer gets pulled back to increase the borehole diameter. Once the desired width is reached, piping gets pulled back into the hole for final installation. Benefits of horizontal directional drilling: There are many horizontal directional drilling companies today that engage in this trade because it is always in demand. The following are the benefits of choosing directional drilling over the conventional trenching method to install pipes. Pipeline durability. The precise process of installing pipes using directional drilling prevents damage during installation. Horizontal directional drilling also allows for installing pipes under rivers, highways, and driveways which minimizes exposure to elements that may lead to wear and tear. Faster pipe installation. Perhaps one of the most notable benefits of horizontal directional drilling is how it cuts down the time needed to complete a project. With less ground disturbance, it won’t take long to fix the job site, and you won’t need as many workers as you would when you need to dig an open trench. Faster work also means less upfront cost for the contractor. Thus, if you can reduce operational expenses, you can increase profit margins in return. Better for the environment. If you are installing pipes in a residential area, homeowners are often concerned with the amount of disruption to the landscape. This is not the case with directional drilling. Although there is still some disturbance, it is only minimal and quickly restored. The process does not contaminate soil and groundwater as much as open trenching does. Directional drilling also helps preserve the environment and protect rock formations and bodies of water such as rivers and streams. Flexibility in project locations. Installing pipes underneath concrete sidewalks and densely populated cities is not an issue if you employ directional drilling. In fact, directional drilling was designed to address the challenge of working on challenging locations with above-ground obstructions. In the past, it would be virtually impossible to imagine or perhaps too costly to install pipes in the most challenging urban settings. But nowadays, directional drilling makes all of these possible which is why it has revolutionized the utility industry within the last several decades. Read Also: Guide To Choose An Authentic Plumber Service Company World Of Change: What It’s Like to Work as a Petroleum Engineer Mastering Troubleshooting For Power Tools: Your Comprehensive Guide

READ MOREDetails
Disadvantages Of Synthetic Text-To-Speech

The Disadvantages Of Synthetic Text-To-Speech In Advertising

Speech to text conversion is commonly used in advertising as an alternative to using a real human voice. It works using technology that converts input text into speech that is designed to be as natural as possible. There are a lot of variants on the type of technology used, but overall the software tends to be very similar and fairly easy to get hold of for businesses who want to use it in their advertising. If you are considering using this modern software for your next advertising campaign, it’s definitely worth thinking carefully about. Despite it being somewhat cheaper than real human voiceovers, there are some pretty chunky downsides to be aware of. Let’s take a closer look at the disadvantages of synthetic text-to-speech in advertising: It Is Unlikely To Be Quicker Than A Professional Human Voiceover Many people think that a computer system will be a quicker way to get a voiceover when in fact the system used can be very time consuming and challenging to use correctly. It isn’t a simple process and there’s quite a lot of learning involved in order to get a good result. The Results Are Never As Natural As A Human Voice Despite the incredible advances in technology with AI voices, the result of text-to-speech technology is still pretty robot-like. The natural nuances of the human voice have still not been mastered when it comes to AI voice so if you do plan to use AI vocals for your advertising campaign it is important to know that it will be noticeable. People Don’t Like AI Voices 73% of people don’t trust AI voice technology and 71% of people prefer a human voice rather than a synthetic one. When it comes to your branding and message, that’s quite a big factor. Could an AI voiceover turn your audience off your advertising? Pronunciation Will Not Be Perfect If you’re wanting a clear message from your AI voiceover you may struggle with text-to-speech. Pronunciation is always a little bit off, which means your messaging may well be lost somewhat via the voiceover. Technology Is Still Young You may feel that soon enough there will be a way to use AI in text-to-speech advertising that is cheaper and quicker than a real voiceover. The problem is that great AI voice-overs are pretty far off. Technology has advanced a lot but nowhere near making it easier, quicker, and realistic compared to a human voice-over actor. Using text-to-speech advertising now means accepting its limitations. Pace Of Speech Is Unnatural The speech will be read as it is written when you use text-to-speech software. This means that there won’t be any natural pauses, hesitations, and silences as you would have with a professional voiceover actor. Companies offering text-to-speech software will advise you to add exaggerated pauses and paragraph breaks in your script to get around this issue. The fact is that this doesn’t sound dramatic or effective, it just sounds awkward because the AI voice can’t add the tone and intonation necessary to make those pauses make sense. Consider Using A Professional Voiceover Service If you want a natural, personality-filled, professional voiceover for your advertising, consider using a professional voice over agency. The costs compared to text-to-speech are surprisingly affordable, and the results are second-to-none compared to AI voices. It could be the perfect way to give your advertising the professional finish you’ve been looking for. Read Also: Tekmetric: Auto Repair Software and So Much More Key Marketing Tips To Gain More Customers For Your Health Care Practice

READ MOREDetails
how to turn off chromecast

Fix: How To Turn Off Chromecast? – Latest Update 2021

Are you the regular users of the Chromecast devices? Then you already notice sometimes the Chromecast turning off is becoming very troubling. Turning off the Chromecast helps you to hide the connected device’s presence when people start searching in your network. In that respect, the most important question which comes to your mind is how to turn off Chromecast? As Chromecast sometimes gives you more sweat than the usually hot summer weather can. As every one of the users is aware of these facts, the Chromecast does not come up with an on and off switch.  Many users are preferring the Chromecast device showing in their home network while it is not being used. But many of the regular users do not prefer the Chromecast device showing in the home network. How To Turn Off Chromecast In Television? The easiest method of turning it off is just to unplug the device. Or the easiest answer is just to disconnect the wifi connections of the Chromecast. But both of these ways are not the fully authentic and technical way to stop working. Before asking how to turn off Chromecast, you have to learn about the Chromecast turning off technical functions. How to turn off Chromecast on tv is a very common question when you are accessing multiple television connections with the Chromecast. For your better understanding and knowledge, here is the step-by-step guide on how to turn off the Chromecast device from your home network, android phone, and Television. Turning Off The Chromecast By Switching Off The Plug As we told you, switching the power off is the easiest method to turn off the Chromecast devices. Chromecast is coming with a separate power port, which was connected with the main switch. You have to plug in the wall charger to get the connection. If you can unplug the charger from the port, the device is automatically getting disconnected from the network. If the Chromecast device is connected with your television, you can switch off the television. But that move does not turn off the Chromecast device. If you face a problem turning off the main power switch, you can use the aromatic switch to get the operation done automatically. But still, then the Chromecast device is connected with your home wifi networks. And the Chromecast device is still showing in the available connected devices like the android phones. How To Turn Off Chromecast On Android? In many Chromecast devices are getting used in the single house, then most of the time the android phone users are facing more trouble turning off the devices. If you are using the Chromecast devices, then turning off the Chromecast on android is the common question arising in your mind when you are facing the interruption in the middle of your streaming videos.  Most of the users want to turn off the Chromecast to preserve the phone’s safety-related concerning issues. And most of the users are facing problems during the streaming of the video because, in the middle of your streaming video, some content can pop up. You can simply stop the casting by simply enabling the Chromecast device from your android phones. And this is the simple process of how to turn off Chromecast. Step 1: Just click on the image of the Chromecast device from your android phone. Step 2: Open the file of the Chromecast devices. Step 3: Click on the settings of the Chromecast devices options and open the setting options. Step 4: After entering the setting of the disable Chromecast option, let others control your cast media. Step 5: And you can turn off the Chromecast from the android devices. How To Stop Casting To Chromecast? If you want to stop the casting of the Chromecast, as you already know, there are many apps that are getting compatible with the Chromecast. Still, if you are using these apps to operate the Chromecast, then you lose control over the Chromecast. And if the remote control over the Chromecast is disabled, then your manual controls are also limited. How to turn off Chromecast is a common feature of turning off the multiple connectivities of the television. But if you lose control over the Chromecast, the volume bar to pause button everything is in a non-functional state. For these purposes, you can use google chrome. Here is the step-by-step process to stop the casting of the Chromecast. To stop the interference from popping up, casting closer is an essential task. Step 1: Go to the google chrome browser settings. Step 2: Then go to the cast options after opening the browser setting options. Step 3: If you see the Chromecast options in the blue color mode, which means the Chromecast is now in the functional state. Step 4: You have to make it white by disabling the options. Step 5: After disabling the options, then cross the chrome and restart your device. Step 6: After restarting your device, recheck the casting option after opening the browser. Step 7: You can also shut down the Chromecast casting from your google homepage. Bottom Line If you are using the Chromecast in multiple ways and the different devices, switching off the devices and turning off Chromecast is necessary. How to turn off Chromecast is a common question that has multiple ways of solving.  If you ask us why you need to turn off the Chromecast devices, here are the answers. If you want to preserve your device security and are eager to close the outside’s external interference, then turning off the Chromecast is the easiest solution.  When you are connected with the Chromecast devices, you automatically see how many other devices are connected with the network, and this causes interference and trouble in the network. More Resources: Headphones vs Earbuds: How to Choose for the Best Music Experience. Your Guide In Buying Kid-Friendly Gadgets. Alexa Voice Assistant: Why It Succeeds Where Others Fall

READ MOREDetails