6 Tips to Shoot Hyperlapses Quickly and Easily Using a Camera Gimbal

Published on: 14 September 2018 Last Updated on: 24 February 2020
Camera Gimbal

Hyperlapses are generally eye-catching. Traditionally, shooting a Hyperlapse video required you to attach your camera to a tripod as you carefully marked the ground distance. The ground was supposed to be an even one. However, this approach was slower and tiresome. Today, you don’t need a tripod. All you need is a DSLR camera gimbal or any handheld stabilizer that will work with your camera. The gimbal will allow you to shoot the Hyperlapses fast and easily. To achieve this, you need to observe the following 6 tips.

1. Set Your Camera Right:

You start by fitting the camera firmly on the gimbal. This will enable you to shoot the Hyperlapses in a stable way. Then, you should adjust the digital camera to shoot either 4K videos or short-interval shots. Thee 4K setting is better since it allows you to add the ramping speed afterward. Lastly, If the footages are not stable, erase the tracking points.

2. Walk Cautiously When Shooting:

Shooting with a gimbal doesn’t give you the freedom to walk unsteadily and fast during the production. You need to walk uniformly and slowly to ensure that the quality of the Hyperlapses is not compromised. Once you press record, you should walk towards your target with the gimbal level well-maintained. A handheld gimbal will deliver stable Hyperlapses provided that you don’t hurry the shots.

3. Shoot Longer than Necessary:

For the sake of post-production editing, it’s important to shoot the Hyperlapses longer. You have to remember that Hyperlapses are often unpredictable. With longer footages, it becomes easy to omit the unstable parts and keep the stable ones. Moreover, the editing is fast-achieved.

4. Always Focus on a Fixed Point:

You can do this by switching to the lock mode. The mode allows you to shoot the Hyperlapses easily and not to lose the focus. You shouldn’t lose your target as this may cause the gimbal to fail you. You just need to prioritize on achieving a better view during the entire shooting path.

5. Enhance Motion Blur with ND Filters:

People in motion and blinking cars may interfere with your Hyperlapses by limiting your exposure. To enjoy longer exposures during a daytime shooting, you should enhance the motion blur. The best way to do it is to use the ND filters. While encouraging longer exposures, the filters enable you to shoot amazing still images that are good in quality and balanced.

6. Create Parallax By adjusting the Gimbal Settings:

Finally, it’s important to create parallax if you want a different motion dimension in your shots. To create parallax, you should:

  • Open the gimbal assistant software to access the control panel feature.
  • Click on it and adjust the shutter speed to the lowest value possible (one second).

Once you are done, you can press record and start to shoot.

Put simply, a handheld gimbal can help you shoot quality and stable footages. The experience is enjoyable but you have to do it right. With the above 6 top tips, you can be able to shoot Hyperlapses comfortably with the stabilizer. This ensures that the post-production is also done seamlessly.

Read Also:

Content Rally wrapped around an online publication where you can publish your own intellectuals. It is a publishing platform designed to make great stories by content creators. This is your era, your place to be online. So come forward share your views, thoughts and ideas via Content Rally.

View all posts

Leave a Reply

Your email address will not be published. Required fields are marked *

Related

Integrated Management System

Run Your Business with Ease Using an Integrated Management System

Starting and running a business may not be the easiest thing to do for most business owners. However, with the developing technology, certain aspects have become a bit easier to manage. For instance, several systems have been developed that help one to run a series of businesses simultaneously. One such system is the Enterprise Resource Planning(ERP) system, a management software system that allows one to manage and integrate a company's operations under one roof. Although there are many ERPs in the market today, the Microsoft ERP system is, perhaps, the most popular. This article will focus on this ERP. In most cases, a business will incorporate financial and operational systems. This system only runs on a specified functionality and does not give room for the company's future growth. The Microsoft ERP system ensures that the business financials, supply chain, operations, manufacturing, reporting, and human resource activities are incorporated under one roof and allows space for the future expansion of the business. An example of Microsoft ERPs is Microsoft Dynamics 365, an easy-to-use system designed to allow any user to run. The software performs all services an enterprise resource planning system provides while allowing increased customer interactions with the businesses. In addition, Microsoft Dynamics 365 is connected to the cloud servers storing the business information securely and giving a high-speed bandwidth for operation. The software is established on some strict, well-trusted technologies that provide adequate services to its users around the globe. Below is a list of some of the significant benefits of building a business on the Microsoft ERP system. However, the list is not exhaustive as there are plenty of other reasons. 1. Managing the business finances Finance is a crucial component of any business. The Microsoft ERP system helps the company managers to make informed business decisions. It connects data from all aspects of the operation of the business and helps develop financial charts in real-time by use of the Power BI dashboards. In addition, the system makes it easier to close financial deals and generate reports and ensure that they comply with the standards put in place by the government. The generated reports can be used to make accurate future predictions on the company operations hence promoting growth. 2. Automate business operations Running a supply chain in any business can be hectic as you need to connect all the sales and purchases in the business. The Microsoft ERP system automates all the operations, making it easy to run the business services. It optimizes the inventory levels by using the dynamically updated inventory system, reducing the rate of overstocking. Moreover, using the system maximizes profit and reduces the rate of making errors in the business. 3. Improve customer relations For any business to stay relevant, It must sell its goods or services, thus making the customer a critical player. The Microsoft ERP system prioritizes sales depending on the revenue it will generate. Doing so can keep track of all the customer interactions and give predictions on increasing revenue. One can track the customers and respond to their inquiries as they are registered after every interaction with the system. The system also makes it possible for the business to deliver exceptional services to clients. With the system, you can overlook the workloads and evaluate the staff skills to ensure customer service quality. 4. Maximize business operations By handling everything under one roof, it makes it possible to manage every operation without skipping any. For instance, the reports generated to allow you to keep track and void any errors that may cost the business. At the same time, the reports can be used to forecast future events and help the business make informed decisions if there is impending danger in the future. Running the business becomes easier for the business owner and reduces the required staffing, maximizing the raised profits. Conclusion Every business owner should incorporate an integrated system of management for its functions. The Microsoft ERP system is one such system as it ensures a smooth running of the business operations, better customer relations, and future planning. Read Also: 4 Simple And Cheap Methods To Attract More Customers International Business Degrees in Today’s Global Marketplace KF Documentary: Tips For Small Business To Learn From KFC’s Brand Turnaround Role of supply chain management in business

READ MOREDetails
Scan

How To Scan From Printer To Computer?

Even been assigned the task to edit a file and scan it back? You might have wondered how exactly you would do that. The question of how to scan from a printer to PC can be tricky and you might need a little assistance in this aspect. Scanning a file from a printer to your PC can be an easy task for you if you follow the instructions given below. The following are the steps you need to follow to easily scan a document from your printer to your PC or laptop. Multifunction Color Laser Printers are the best when it comes to printing colorful images. Connect your computer to the scanner: First of all, you need to make sure that your PC or laptop is connected to the scanner. If it is not connected, then connect the scanner to your computer. Both the machines should be connected to a cord, as well as both of them, should be connected to your WiFi. Place the file on the scanner: Now you have to place the document, which you wish to scan, face-down on the scanner. Once you have properly placed the intended document, close the lid of the scanner. Open ‘Fax and Scan’ on your computer: Now, using your PC or laptop, select ‘Start’. You can find the ‘Select’ option on the lower-left corner of your screen. Now navigate to desktop apps and open ‘Fax and Scan.’ You can also open ‘Fax and Scan’ by typing this name on the search bar. Checking if the printer is correct or not: Once you have opened the ‘Fax and Scan,’ navigate to the ‘New Scan’ tab and click it. You can find the ‘New Scan’ tab on the upper left corner of the screen of your PC or laptop. A new window will be opened when you will click on the ‘New Scan’ tab. Now you need to make sure that the printer is correct. Navigate to the upper left corner of the newly opened window and check whether the printer is correct or not. If the printer is not correct, click on the ‘Change’ option, and choose the correct printer you want to use. Picking the right settings: Now, you need to pick up the right settings before scanning your file. Firstly, select the right type of file. You can choose the file type in the ‘Profile’ section. Now choose whether you want to print a ‘black and white’ document or a ‘colored’ one. Now choose the type of file you want your file to be saved as such as the PDF or JPEG format. Now, you can adjust other settings such as brightness, resolution, and contrast etcetera, if you want to. Scan the document: After you have picked the right settings, make sure that you preview the file before scanning it. If something does not look right, you can adjust it now. If you want to make any changes right now, you need to repeat the process to ensure that the document is completely right before you scan it. Finally, click on the ‘Scan’ option and your document will be scanned. If you want to find the scanned document, open file explorer, and navigate to the Documents folder. You will find the Scanned Documents folder in the Documents folder. Read also: Paper Authority: Basic Tips in Purchasing a Printer 7 Ways To Stop Spending So Much On Printing In Your Business Advance Copier: Printing Quality Business Cards On Your Own Computer

READ MOREDetails
3d PrintingTechniques And Application In The Energy Sector

3d Printing: Techniques And Application In The Energy Sector

3D printing is manufacturing by constructing a three-dimensional object from a digital 3D model. Emerging technologies like 3D printing have brought revolutionary advancements in various industries, and the energy sector is no exception. This article focuses on the techniques and applications of 3D printing in the energy sector, highlighting its potential to transform traditional manufacturing processes, optimize efficiency, and support sustainable practices. Types Of 3D Printing Techniques For the Energy Sector There are several techniques employed in 3D printing, including Fused Deposition Modeling (FDM), Selective Laser Sintering (SLS), and Stereolithography (SLA). Each plays a significant role in rapid 3D printing services. Here's a detailed explanation of these 3D printing methods: Fused Deposition Modeling (FDM): FDM is the most famous 3D printing technique, where a thermoplastic filament is heated, and a 3D object is formed. FDM enables the production of complex shapes, intricate designs, and functional prototypes that improve energy systems. Selective Laser Sintering (SLS): SLM employs a high-powered laser to selectively fuse powdered materials, predominantly metals, generating durable and intricate components. This technique finds applications in manufacturing heat exchangers, turbines, and other robust energy system components. Stereolithography (SLA): SLA uses a liquid resin and solidifies it when exposed to a specific wavelength of light, creating precise and high-resolution objects. SLA produces custom-made energy storage systems, solar panels, and intricate electrical components for better energy utilization. Advantages Of 3D Printing In The Energy Sector There are several advantages of 3D printing, of which it has been in the leading demand. Some basic benefits are explained below:- Cost Reduction: 3D printing allows the production of intricate and complex components in a single process, eliminating the need for assembly. It reduces manufacturing, increases efficiency, and lowers production. Customization And Optimization: The flexibility of 3D printing enables the customization of energy components based on specific requirements. By optimizing shapes and structures, energy systems can be designed for optimal functionality, resulting in enhanced performance and reduced energy wastage. Supply Chain Sustainability: Traditionally, energy systems rely on extensive global supply chains. Implementing 3D printing can reduce the dependence on transportation, minimize carbon footprints, and shorten lead times, contributing to a more sustainable energy sector. Improved Efficiency: 3D printing enables the creation of lightweight components with intricate geometries, reducing energy consumption and improving overall system efficiency. This translates to enhanced energy generation, transmission, and storage capabilities. Application Areas In The Energy Sector 3D printing is applicable in some areas in the energy sector as follows:- Renewable Energy Components: 3D printing facilitates the production of wind turbine blades, 3d printed solar panels, and energy storage systems, allowing customized designs that maximize energy output and efficiency. Optoelectronic devices like photovoltaics and sensors can also benefit from 3D printing. Energy Infrastructure: 3D printing for manufacturing pipes, heat exchangers, and valves reduces costs and enhances their resistance to corrosion, heat, and pressure. Advanced materials and designs derived from 3D printing contribute to safer and more reliable energy infrastructure. Energy Efficiency Devices: Customizable and intricate designs are made possible with 3D printing in developing energy-efficient devices like heat sinks, smart meters, and sensors. These technologies enable better monitoring, optimization, and management of energy consumption. Tooling And Prototyping: 3D printing expedites the process of producing prototypes and specialized tools for testing and maintenance within the energy sector. This results in faster innovation cycles and improved productivity. How  3D Printing Works The basic steps which are followed by 3d printing  are as follows:- 1. Submission Of Design: The customer provides a 3D design file in a compatible format.STL or.OBJ, to the service provider. This design file can be created using 3D modeling software or downloaded from an online repository. 2. Pre-Printing Analysis: The service provider examines the design file to ensure its suitability for 3D printing. They check for potential issues, such as intersecting geometries or unsupported overhangs, that may affect the printing process or the final result. 3. Material Selection: Depending on the customer's requirements and the properties desired for the object, the service provider suggests suitable materials for the 3D printing process. Options can include various plastics, metals, ceramics, or composite materials. 4. Printing Process: Once the design and material considerations are finalized, the 3D printing process begins. The service provider prepares the 3D printer, loads the selected material, and starts printing. The printer follows the instructions in the design file to layer the fabric and create the desired object. 5. Post-Processing: After printing, the printed object is typically subjected to post-processing steps. It may involve removing support structures, cleaning the thing, or applying surface finishes to achieve the desired texture, color, or smoothness. 6. Quality Assurance: The service provider examines the printed object for defects or imperfections and ensures it meets customer requirements. If necessary, adjustments or corrections can be made before final delivery. Conclusion Integrating 3D printing techniques within the energy sector presents transformative opportunities for manufacturing, sustainability, and energy efficiency. The ability to customize designs, reduce costs, optimize efficiency, and shorten production timelines can revolutionize energy generation, transmission, and storage. As this technology evolves, a collaboration between 3D printing experts, energy specialists, and researchers will lead to further breakthroughs, fostering a more sustainable and efficient energy future. Read Also: Advance Copier: Printing Quality Business Cards On Your Own Computer 7 Ways To Stop Spending So Much On Printing In Your Business Digital Printing Contributes Much Towards The Progress Of The Industry

READ MOREDetails